by Jacqlyn Kirkland | Aug 26, 2020 | News
AWC Names Jackson Morrill President/CEO
Jackson Morrill, president of the Composite Panel Assn. since 2015, is resigning from that position and will become president and CEO of American Wood Council effective in mid-September.
AWC contributes to the development of public policies, codes and regulations which allow for the responsible manufacture and use of wood products. It has been out front in recent years in its support of mass timber construction.
Prior to his work at CPA, Morrill was director at American Chemistry Council and he practiced environmental law with a DC-based firm. Morrill graduated from Tulane University School of Law and gained a bachelor of arts from the University of Virginia.
AWC was re-chartered in 2010 and has links to the old National Forest Products Assn. The AWC web sites lists approximately 50 member companies, most of them primary manufacturers of lumber and panel products.
RELATED ARTICLES
CPA FALL MEETING LOCATION CHANGE
DAVID SMITH SERVES AS CPA CHAIRMAN, ’21 BOARD ANNOUNCED
ANDY O’HARE NAMED NEW CPA PRESIDENT
The monthly Panel World Industry Newsletter reaches over 3,000 who represent primary panel production operations.
Panel World is delivered six times per year to North American and international professionals, who represent primary panel production operations. Subscriptions are FREE to qualified individuals.
Complete the online form so we can direct you to the appropriate Sales Representative. Contact us today!
by Web Editor | Jan 31, 2018 | News
American Forest & Paper Association President and CEO Donna Harman and American Wood Council President and CEO Robert Glowinski issued the following statement regarding the Environmental Protection Agency’s (EPA) issuance of new guidance to reclassify certain major sources as area sources under the Clean Air Act:
Donna Harman, President and CEO of AF&PA
“For too long, the air permit process has been overly bureaucratic, slow and outdated, thereby causing unwarranted red tape, costs and delay for the regulated community. In some cases, these problems have been created by agency interpretations that are not even consistent with the plain meaning of the Clean Air Act as written by the people’s duly elected representatives in Congress. The old ‘Once In, Always In’ approach contradicted both the law and common sense by treating a source as major even if production process changes or controls permanently reduced emissions levels to the minor source level.
“We applaud EPA’s new guidance, which is faithful to the text of the Clean Air Act and will not only reduce unwarranted red tape but will remove disincentives to voluntary efforts and technical innovations that could reduce emissions.
“This action is consistent with our recommendations to EPA and the Department of Commerce in response to President Trump’s early directive on streamlining permitting and reducing regulatory burdens to promote domestic manufacturing.”
Robert Glowinski, President and CEO of AWC
“Reforming the cumbersome environmental permit system is essential to reviving the competitiveness of U.S. manufacturing. Eliminating the old ‘Once In, Always In’ policy is a step in the right direction to streamline the air permitting systems.
“We are pleased that EPA has returned to the plain reading of the Clean Air Act for air toxic regulations. The old policy arbitrarily put a facility into a regulatory time warp from which it could never escape.
“Eliminating the OIAI policy creates incentives for facilities to reduce emissions below the regulatory thresholds which is a win for the environment and a win for business.
“The regulatory burdens of complying with a MACT standard are significant, especially for smaller mills, which this policy could help. Mills that are able to reduce their emissions below the threshold, and this guidance gives them an incentive to do so, should be freed of unnecessary reporting, monitoring and recordkeeping requirements as long as they operate controls to stay below the cutoffs.
“Consistent with today’s action, we encourage EPA to make the appropriate changes to the regulations as soon as possible.”
From the American Forest & Paper Association: https://www.afandpa.org/media/news/2018/01/26/forest-products-manufacturers-applaud-epa-permit-streamlining
by Web Editor | Nov 3, 2017 | News
American Wood Council released the following statement regarding the U.S. House of Representative’s passage of the Resilient Federal Forests Act of 2017 (H.R. 2936). The bill (H.R. 2936) includes the research title of the Timber Innovation Act (H.R. 1380/S. 538), which would establish a performance driven research and development program for advancing the use of innovative wood products in building construction.
“The United States has an opportunity to help bring an innovative and sustainable technology to our nation’s construction industry,” said AWC president and CEO Robert Glowinski.
“This bill includes language directing the technical assistance and research components already in place at the U.S. Department of Agriculture to facilitate the use of these innovative wood products into mainstream construction through research and development, education, and technical assistance. Supporting mass timber construction is a win-win because it would introduce new carbon-neutral building materials to our urban areas, as well as job creation in rural areas.”
Congressmen Bruce Westerman (R-AR), Mike Conaway (R-TX) and Mike Thompson D-Calif.) helped sponsor and advance the bill.
From Woodworking Network: https://www.woodworkingnetwork.com/wood/pricing-supply/wood-council-applauds-house-passage-resilient-federal-forests-act?ss=news,news,woodworking_industry_news,news,almanac_market_data,news,canadian_news
by Web Editor | Mar 20, 2017 | News
A new piece of bipartisan legislation has been tabled by The United States Senate and House of Representatives named the Timber Innovation Act. The bills were put forward to further the development of tall timber buildings in the U.S., thereby supporting the nation’s considerable timber market and the rural manufacturing jobs it entails.
“The United States has an opportunity to bring new, sustainable mass timber technology to our construction industry, and the Timber Innovation Act directs technical assistance and research components already in place,” said Robert Glowinski, President and CEO of the American Wood Council (AWC).
The bills aim to create a focused research and development program to aid in the advancement of tall wooden structures in the United States. Federal grants will be awarded to fund the research undertaken on state, local, university, and private sector levels. This includes the provision of education to architects and builders, in relation to timber construction.
“Mass timber technology is revolutionizing and disrupting the way buildings are being built around the world. Unfortunately, the United States has been trailing other markets in this regard. The Timber Innovation Act will significantly contribute to enhancing our industry’s ability to close the knowledge gap and stimulate private sector investment,” remarked general manager of the Binational Softwood Lumber Council (BSLC), Cees de Jager.
Additionally, the act will introduce educational and technical programs on timber design and applications, in conjunction with the Department of Agriculture and state foresters. Responding to continued job scarcity in the aftermath of the recession, retrofitting buildings in regions of high unemployment will create new positions in rural areas, while also addressing environmental concerns.
From ArchDaily.com: https://www.archdaily.com/866841/new-timber-innovation-act-advocates-for-nationwide-timber-construction-in-the-united-states
by Web Editor | Jan 18, 2017 | News
Mass timber is sprouting up in cities in North America and abroad. After years of feasibility studies and design proposals, buildings six stories or taller constructed primarily from pre-engineered wood products are being considered in cities around the world.
In London, one proposal, called the Splinter, would rise to 100 stories. In Chicago, Perkins+Will (in collaboration with Thornton Tomasetti and the University of Cambridge) has designed an 80-story high-rise with 300 duplex apartments. If built, River Beech—a key component of P+W’s master plan for the Riverline development—would be made almost entirely from mass timber.
So-called “plyscrapers” are still a tiny sliver of nonresidential construction. In the past five years, only 17 buildings seven stories or taller have been completed worldwide, mostly in Europe and Canada. Six more have started construction, according to the American Wood Council.
Mass production of timber for high-rise construction is still in its infancy in North America. Specifying these products in the U.S. faces resistance from insurers, regulators, and code officials. Steel fabricators and concrete suppliers disparage mass timber for taller buildings on the grounds of safety and durability.
Proponents cite the speed at which tall buildings can be constructed using pre-engineered wood and mass timber’s ability to sequester carbon. Joey-Michelle Hutchison, RA, LEED AP BD+C, CSBA, Associate Vice Principal, CallisonRTKL, says, “The role of mass wood is going to grow because of the demand for sustainable design.” Researchers from Yale and the University of Washington, in a study published in the Journal of Sustainable Forestry (March 28, 2014), postulated that using wood substitutes for constructing buildings (and bridges) could save 14–31% of global CO2 emissions.
From Building Design + Construction: https://www.bdcnetwork.com/mass-timber-what-heck-wow
