by Web Editor | Jun 25, 2018 | News
The U.S. Environmental Protection Agency’s (EPA) new federal formaldehyde emissions regulations took effect on June 1st, 2018. As of this date all composite wood products must be certified as compliant with these regulations.The EPA defines composite wood products here as both domestic and imported particleboard, medium density fiberboard (MDF), and hardwood (decorative) plywood.
Structural engineered wood products made for construction applications are exempt from this regulation, including structural plywood, oriented strand board (OSB), wood I-joists, laminated veneer lumber, and glued-laminated timber. All of these products are manufactured with low-emitting, moisture-resistant adhesives in accordance with existing product standards and building codes, according to The Engineered Wood Association (APA).
For quick reference, structural engineered wood products marked with the APA Mark of Quality are considered exempt from the new regulations. If unmarked products from APA member mills are sold into applications that do not require a certification mark, the product invoice and an APA certificate of conformance can be used to identify the product as exempt.
The Formaldehyde Standards for Composite Wood Products Act was signed by President Barack Obama on July 7th, 2010, based on the Air Toxic Control Measure developed by the California Air Resources Board (CARB). The first phase of regulation rollout, now in effect, allows for compliance with either the CARB ATCM Phase II or the U.S. EPA TSCA Title VI. Starting March 22nd, 2019, only the U.S. EPA TSCA Title VI will be permitted as a path to compliance.
From Builder: https://www.builderonline.com/building/regulation-policy/structural-engineered-wood-products-exempt-from-new-epa-formaldehyde-regulations_o
by Web Editor | May 10, 2018 | News
Boise Cascade Co., Boise, Id., has agreed to purchase Norman Distribution, Inc., a distributor of engineered wood, commodity lumber, and specialty building materials based in Medford, Ore.
“Norman Distribution has built an excellent reputation as a strong industry partner throughout its four decades in this business,” said Nick Stokes, executive VP of building materials distribution. “The positive relationships they have built with their customers and suppliers have been a key to their success. We are very pleased to welcome their team to Boise Cascade and strengthen our presence in the Oregon, Northern California, and Nevada markets.”
The entire staff is expected to remain, under the banner Boise Cascade Building Materials Distribution Medford Branch.
“Norman Distribution is excited and proud to join Boise Cascade,” said owner Jeff Norman. “We were one of the first customers of their EWP mill in White City, Ore., which began operating in 1991. This is a great strategic and cultural fit, which will allow us to grow our product line and better serve our customers.”
The acquisition is expected to be complete in the coming weeks.
From Building Products Digest: https://www.building-products.com/article/boise-cascade-buys-norman/
by Web Editor | Jun 23, 2017 | News
From: Panel World Editors
International Beams plans to build the first cross-laminated timber production facility in the Southeastern U.S. in Dothan, Ala. A 227,000 square foot facility, a vacated GE plant, will be the manufacturing site for the company’s two new products, MAX-CORE CLT and MAX-CORE GLULAM.
International Beams, which has EWP (LVL, I-joist and rimboard) manufacturing facilities in Quebec and Ontario and is headquartered in Sarasota, Fla., was approved to receive tax incentive abatements for 10 years by the state of Alabama and the Houston County and 20 years by the city of Dothan.
Additionally, the Commission approved appropriating $632,000 to the Industrial Development Board of Dothan to meet obligations with the Alabama Municipal Electric Authority to facilitate the IB XLAM USA project.
by Web Editor | Sep 12, 2016 | News
Like much of the industry, engineered wood producers are still navigating a fickle recovery in which builders are challenged by supply constraints, tight lending, and hard-to-come-by lots. Though the market is emerging from the recession, it’s still on the slow side.
“The demand is there for 1.5 million housing units. We’re not meeting that,” says Joe Elling, director of market research for APA–The Engineered Wood Association. Production is up on a year-ago basis, “but starts could be stronger if some of these supply-side constraints were not as binding,” Elling says. “I anticipate a modest improvement in the second half of the year, but it’s still going to be agonizingly slow going forward.”
For engineered lumber manufacturers and the dealers who sell their products, the slow recovery presents both challenges and opportunities. Along with the obvious—a slower return to at-peak sales—the ongoing labor shortages have created an even stronger need for product education. At the same time, those labor constraints provide even more motivation toward using engineered products that boost efficiencies and cut back on waste.
Overall, the industry has seen a positive boost in public opinion toward wood products, be they engineered or otherwise, as high-profile projects showcase their capabilities, beauty, and warmth.
“One of the biggest things in the forest products industry today that affects EWP the most is the general feeling in the world that wood is good,” says Mike McCollum, director of engineered wood business at Roseburg. “Wood is now the first choice in everybody’s eyes. Its sustainability, its efficiencies, its workability, its natural warmth, along with the fact that it is easy to design with and easy to build with…everyone has been awakened to this idea that wood is good. Then, when you take it to the next step, everything that engineered wood brings to the construction market is highlighted even more.”
From LBM Journal: https://www.lbmjournal.com/in-depth-engineered-lumber-2/
by Web Editor | Jul 6, 2015 | News
APA – The Engineered Wood Association has released its 2015 Market Outlook report.
Similar to 2014, extremely harsh weather caused home building to stall in the eastern half of the U.S. during the first quarter of 2015. However, with mortgage rates below 4 percent, new home sales rose 9 percent versus the fourth quarter of 2014, an indication that new home demand is improving. Brighter employment prospects for young adults is leading them to head out on their own, adding to the strength in the demand for new apartment buildings. These forces point to the recovery in residential construction getting back on track in the second half of this year.
“The biggest changes in the economic environment since a year ago are the strength of the U.S. dollar, the drop in oil and gasoline prices, and efforts by central bankers to stimulate their economies by driving down long-term interest rates,” said Joe Elling, market research director for APA. “This mix of events is likely to support lower interest rates in the U.S. than what was expected a year ago at this time. We are still in an unprecedented situation with respect to Federal Reserve policy though, and I remain concerned about the ability of the Fed to return its balance sheet to a more normal state without a major disruption in financial markets here and abroad.”
Critical to the strength in the demand for new housing is the ability of young adults to have the economic wherewithal to be on their own and, ultimately, to be able to own a home. Despite very favorable affordability conditions from a monthly standpoint, tight lending standards and heavy student debt burdens are constricting that group’s home-buying power. These conditions are expected to persist through the rest of the decade; thus, as housing starts return to their anticipated 1.5 million level by 2018-2019, multifamily starts are expected to account for roughly 36 percent of the total.
Housing starts in Canada totaled just over 198,000 units in 2014. Canada did not experience a housing bubble like the U.S did, but, similar to the States, multifamily unit structures are accounting for a greater share of new residential construction compared to 10 years ago. The forecast calls for starts in Canada to run in the 180,000-190,000 unit range, with multifamily units accounting for around 40 percent of the starts.
From APA – The Engineered Wood Association: https://www.apawood.org/market-outlook-2015
