by Web Editor | Apr 20, 2018 | News
First Full CLT Building In California Opens
The ribbon cutting ceremony by the Plumas County Health and Humans Services Department for its new Biomass Boiler Building in Quincy, CA on April 6, marked the opening of the first building in California made entirely of cross-laminated timber (CLT). CLT is establishing itself as a sustainable building material with a reduced carbon footprint and an inviting, natural aesthetic. Whereas limited uses of CLT were previously implemented across the state of California in buildings as a roof or floor system, the Biomass Boiler Building was constructed using CLT panels for the complete structural system to resist gravity and lateral forces, such as wind or a seismic event.
Owned by Plumas County, the industrial Biomass Boiler Building located adjacent to the Health and Human Services Department in Quincy, CA, includes approximately 2,000 SF of space. It houses an innovative biomass system using organic and sustainable waste material to generate heat for the Health and Human Services Building as an alternative to fossil fuels. The boiler is only the second of its kind in the U.S.; it is a community-scale, biomass boiler unit that runs on hog fuel, a coarse woody material generated as a byproduct directly from forest restoration and management activities.
Camille Swezy, Wood Utilization Program Lead of Sierra Institute, remarked, “The community of Quincy and Plumas County officials are very pleased with the new Biomass Boiler Building constructed entirely of CLT, now housing an innovative biomass heating system. Timber and wood products development is deeply engrained in Quincy’s roots, and the community is now thrilled to have a demonstration of wood utilization in a practical small-scale application.”
Originally, the Biomass Boiler Building structure was planned to be constructed with a prefabricated metal building system. Plumas County officials and the Sierra Institute decided to take the project in another direction to demonstrate the strengths and benefits of building with timber while also incorporating Plumas County’s most abundant natural timber resources. Plumas County officials worked with the design team to integrate mass timber into the building’s design.
The monthly Panel World Industry Newsletter reaches over 3,000 who represent primary panel production operations.
Panel World is delivered six times per year to North American and international professionals, who represent primary panel production operations. Subscriptions are FREE to qualified individuals.
Complete the online form so we can direct you to the appropriate Sales Representative. Contact us today!
by Web Editor | Apr 4, 2018 | News
Katerra, a high-tech construction firm, has secured $865 million in funding from SoftBank Vision Fund. That money will go toward ongoing projects in the U.S., like the company’s planned cross-laminated timber plant in Washington, as well as research and development activities.
Katerra says its upcoming 250,000-square-foot Washington plant will help scale up U.S. production of CLT so that the material can be more broadly adopted across the construction industry. Katerra’s manufacturing presence in the region will provide hundreds of jobs and stimulate additional jobs through the larger supply chain and associated industries, including design, engineering, and construction. More than 150 construction-specific jobs will be created to build the CLT factory.
Cross-laminated timber, or CLT, is a key ingredient in the so-called timber towers – multi-story high rises built of wood, some reaching 18 stories or higher. Katerra says CLT is valued due to its low carbon footprint and strength.
“CLT… is a material that creates beautiful spaces, is designed for manufacturing, and is sustainable all at the same time,” said Michael Marks, chairman and co-founder of Katerra. “This material represents a great opportunity to create new value within the construction industry and will be central to many of the projects we’ll be designing and building. We feel very comfortable and excited, particularly with the knowledgeable team we have, to make the jump into manufacturing mass timber. We are ready to help bring mass timber to the mainstream of U.S. construction.”
Katerra is already applying its high-tech construction techniques to manufacture building sections in an existing Phoenix factory, in processes similar to auto plants. The Phoenix plant uses CR Onsrud and Laguna machinery, and fabricates rooms and building sections, including cabinetry, plumbing and wiring.
From Woodworking Network: https://www.woodworkingnetwork.com/news/woodworking-industry-news/katerra-receives-865-million-fund-massive-cross-laminated-timber?ss=news,news,woodworking_industry_news,news,almanac_market_data,news,canadian_news
by Web Editor | Mar 26, 2018 | News
From: Panel World Editors
Officials with Oregon State University are investigating a construction incident when a CLT panel failed in mid March at a campus building project. A 4×20 ft. panel, part of the sub flooring between the building’s second and third floors, gave way after delaminating on one end. No construction personnel were in the area and no one was injured. The panel was replaced, other sections of CLT sub flooring were shored up, and work was halted on other CLT sections.
Steve Clark, OSU vice president of marketing and university relations, said the university is bringing in an outside engineering firm to determine cause of the failure and whether any other CLT portions of construction were at risk of failure, and CLT work will resume once any issues are addressed. Ironically, the new Peavy Hall building is home to OSU’s renowned College of Forestry, and the building is designed to showcase Oregon’s forest industry and the relatively new (in North America) mass timber construction movement. However, Clark says project managers “have the utmost confidence in CLT” and plan to finish the project as designed using CLT. The project’s CLT panels are being supplied by D.R. Johnson Lumber of Riddle, Ore., which was the first U.S. producer to gain CLT certification in 2016.
by Web Editor | Mar 23, 2018 | News
Washington State legislators changed building codes in new legislation, a move expected to increase in the use of mass timber products in commercial and residential construction.
The Washington Forest Protection Association says the move will boost business for rural communities and forest landowners and will lead to an increase in the use of mass timber products in commercial and residential construction.
Mass timber products like cross-laminated timber (CLT) have been on the upswing in Washington in recent years, with Vaagen Brothers Lumber of Colville. Wash., and Katerra, a California company both announcing CLT factories in Eastern Washington. The material is increasingly being used in buildings around the state, according to the Washington Forest Products Association.
For Katerra, founded in 2015, CLT is an element in a broader strategy for resetting the building and construction industry. The company announced $865 million Series D funding round led by the SoftBank Vision Fund to fund its new plant in Washington, and it has already accumulated more than $1.3 billion in bookings for new construction, spanning the multi-family, student and senior housing, and hospitality sectors. It already has a fully operational manufacturing facility in Phoenix.
“The $12 trillion construction industry is extremely fragmented with tens of thousands of companies using minimal levels of technology. While labor-productivity growth has skyrocketed in the overall global economy, the construction industry has averaged only 1% annual productivity growth over the past two decades,” said Jeffrey Housenbold, managing partner for SoftBank Investment Advisers. New investors in Katerra’s latest the round include the Canada Pension Plan Investment Board (CPPIB), a private investment fund managed by Soros Fund Management LLC, Tavistock Group, Navitas Capital, DivcoWest, and others.
Read more on this from Woodworking Network at https://www.woodworkingnetwork.com/news/woodworking-industry-news/washington-state-wil-revise-building-codes-okay-mass-timber.
by Web Editor | Feb 19, 2018 | News
SmartLam Eyes $22 Million Maine Expansion For CLT Production
The nation’s first manufacturer of cross-laminated timber plans to set up shop in Maine, with a goal of creating 100 jobs at a $22 million mill, officials said Friday.
SmartLam, LLC of Montana still seeks a mill site, but has committed to building a factory in Maine within 18 months. Founded in 2012, the company produces more than 1 million board feet of the engineered wood product per month and employs 40 people in Montana’s Flathead Valley, SmartLam President Casey Malmquist said. “It is down to two sites right now,” Malmquist said in a telephone interview on Friday. “I’m just waiting to get further feedback on both of those sites and then we will be making our decision.”
“I don’t want to disclose them because I don’t want to influence the deal,” he added. “I think if they can kind of come up organically on their own rather than be influenced by one another it would be a more straightforward deal.”
SmartLam is the second maker of cross-laminated timber, a composite wood strong enough to replace steel and concrete in some types of high-rise buildings, to announce Maine expansion plans this week.
LignaTerra Global LLC of Charlotte, North Carolina announced plans at Husson University on Tuesday to build a $30 million, 300,000-square-foot factory to produce CLT in Millinocket. The company hopes to break ground in July and start production in 12 months with more than 100 workers.
From Bangor Daily News: bangordailynews.com.
RELATED ARTICLES
SMARTLAM TEAMS WITH REDBUILT
The monthly Panel World Industry Newsletter reaches over 3,000 who represent primary panel production operations.
Panel World is delivered six times per year to North American and international professionals, who represent primary panel production operations. Subscriptions are FREE to qualified individuals.
Complete the online form so we can direct you to the appropriate Sales Representative. Contact us today!
