by Web Editor | Feb 24, 2016 | News
Appalachian Hardwood Manufacturers, Inc. (AHMI), promoting the advantages of formaldehyde-free real, solid wood to public, are contrasting its natural qualities with the unsafe laminate flooring that had gotten Lumber Liquidators into trouble with consumers.
“Discount flooring companies selling imported laminate floors have been providing customers with products that can carry seven to twenty times the base amount of carcinogenic formaldehyde allowed by the EPA,” says the AHMI. “At these levels, formaldehyde secretes from the flooring and into the home’s air, becoming a high-level health risk, especially for children and pets who are most susceptible to its effects. Carcinogenic formaldehyde found in artificial wood has been linked to lung and nasal cancer, nausea, asthma, and other severe respiratory issues.”
Wood industry trade groups, including furniture and cabinetry makers, have been trying to separate their goods from the products made in China that contained high levels of formaldehyde. The Kitchen Cabinet Makers Association issued a statement last week saying that there is no risk of exposure to formaldehyde in cabinets that receive its Environmental Stewardship Program seal, because its program requires that engineered wood used in it must be CARB Compliant.
Other groups have questioned the validity of testing methods used to detect formaldehyde in wood products – such as flooring sold by online retailer Wayfair – tests that deconstruct the multi-layered sandwich that makes up laminate flooring. The Hardwood Plywood and Veneer Association estimates that “finishes of paint, lacquer, sealants, laminate, plastic or other material” reduce formaldehyde emissions of the underlying raw board by 90 percent.
From Woodworking Network: https://www.woodworkingnetwork.com/wood/pricing-supply/appalachian-hardwood-manufacturers-tout-formaldehyde-free-real-solid-wood
by Web Editor | Jan 27, 2016 | News
A plywood and veneer mill being built in Springfield will provide 200 full-time jobs once fully operational.
Glendale, Oregon-based Swanson Group is building the new mill on the site of its former facility, which burned in a 2014 fire. According to information from the company, total costs, including permitting, construction and equipment, could exceed $55 million.
While the plant is expected to be up and running in April, it likely won’t reach full capacity until August. The new mill will be roughly 345,000 square feet, located at 1651 S F St., according to company spokesperson Cameron Stewart.
Several factors pushed the company to rebuild rather than lease a different facility, including Springfield’s “proven and dedicated workforce” and its nearby timber sources, according to Stewart.
When at full capacity, the plant will produce about 20 million square feet of veneer each month, which will be turned into 10 to 12 million square feet of plywood products. Annually, it will produce some 120 million square feet of finished plywood products.
From the Portland Business Journal: https://www.bizjournals.com/portland/blog/sbo/2016/01/springfield-plywood-mill-rises-from-ashes-will.html
by Web Editor | Oct 5, 2015 | News
Oak Hill Veneer Inc. will invest almost $2 million to expand its operations in Troy, PA. When completed, the spliced hardwood veneer manufacturer said it expects to add 73 full-time jobs over the next three years, more than double its current size of 62 employees.
Plans call for the construction of a 15,000-square-foot building and adding a new line of veneer splicing equipment. In addition, the company said it will lease a nearby 35,000-square-foot building where it will install a new line of manufacturing equipment to produce veneer board. News of the expansion was announced Sept. 30.
Oak Hill Veneer is one of 18 companies owned by Spanish wood products firm Grupo Losan. Founded in 2008, Oak Hill Veneer specializes in cutting and splicing various thicknesses of veneer in a variety of species, including oak, cherry, maple and walnut, in accordance with Forest Stewardship Council (FSC) certification requisites, according to the corporate website.
“Oak Hill Veneer, Inc. is very excited about our upcoming expansion project,” said Amy Jackson, project coordinator. “This project has been months in the making and we are finally able to make an idea a reality. The state’s assistance will be used towards the purchase of the new equipment and to help with the construction of the new building at the Oak Hill Veneer Inc. site. These upcoming projects will create many jobs and bring more business to the community.”
The company received assistance from the Pennsylvania Department of Community and Economic Development that includes $146,000 in Job Creation Tax Credits and a $225,000 Pennsylvania First Program grant. The project also was coordinated by the Governor’s Action Team in collaboration with the Office of International Business Development and the Northern Tier Regional Planning & Development Commission.
From Woodworking Network: https://www.woodworkingnetwork.com/news/woodworking-industry-news/oak-hill-veneer-plans-2-million-expansion?ss=wood,wood,wood_of_the_month,wood,pricing_supply,wood,components_sourcing,wood,panel_supply,wood,wood_veneer,wood,lumber_quotes_charts
by Web Editor | Aug 17, 2015 | Editor's Blog
Written By: Rich Donnell
Organizers of the 2016 Panel & Engineered Lumber International Conference & Expo (PELICE) have announced several keynoters from the structural panel segment of the industry. Keynoters from the non-structural composite side will be announced soon.
The fifth biennial PELICE will be held April 7-8, 2016 in the Grand Ballroom North of the Omni Hotel at CNN Center in Atlanta, Georgia, USA. Hosted by Panel World magazine, PELICE in 2014 attracted 420 industry professionals who enjoyed 10 keynote presentations as well as forecasts and technical presentations delivered by 45 industry experts, supported by 75 equipment and technology companies that exhibited in the Ballroom.
PELICE will be immediately preceded by the fourth biennial Wood Energy Conference & Expo on April 5-6.
“The 2014 PELICE was refreshing because it was the first one going back to 2008 where all the talk wasn’t about the recession,” comments Rich Donnell, co-chairman of PELICE and editor-in-chief of Panel World magazine. “There was a lot of enthusiasm about projects-in-the-making. I believe that enthusiasm will continue into PELICE 2016 as housing and remodeling markets continue to climb. There will also be a definite buzz in the air at PELICE because it will be held right in the middle of the primary season for the 2016 presidential election.”
Donnell also notes that since the last PELICE there have been a number of production technology developments that will be addressed at PELICE 2016, as well as developments in engineered wood products, such as cross laminated timber, and in composite panels.
“We’ve rounded up a great lineup of keynote speakers from the structural segment of the industry,” Donnell adds. “We’ll now turn our attention to the non-structural side for additional keynoters.”
Donnell says two keynoters—Jonathan Martin, chairman & CEO of Louisiana-based Martin Companies, L.L.C.; and Steve Swanson, president and CEO of Oregon-based Swanson Group, will speak under the heading: “If I Could Build a New Plant In 2016, Here’s What I Would Do.”
Martin will address the development of Martco’s new oriented strandboard plant being built in Corrigan, Texas. The company currently operates an OSB plant in Oakdale, La., which it built and started up in 2006. Its history with OSB dates back to 1982 when it built and started up a plant in Le Moyen, La. It also operates a softwood plywood plant in Chopin, La., another greenfield project.
Swanson will address the new plywood and veneer facility Swanson Group is building in Springfield, Ore. to replace the plant that a fire destroyed in July 2014. Swanson Group operates veneer, plywood and lumber operations in Glendale and Roseburg, Ore. Swanson Group also purchased Olympic Panel Products in Shelton, Wash. in March and is relocating those assets to the new Springfield facility.
Also on tap is Kurt Liebich, CEO of RedBuilt and New Wood Resources, both companies part of Atlas Holdings. RedBuilt manufactures I-joists, open web trusses and LVL at several manufacturing plants primarily in the Western U.S.
Liebich joined RedBuilt’s predecessor, Trus Joist, in 1994 and served in numerous senior management roles. He remained with the company when Weyerhaeuser acquired it in 1999, and was appointed vice president of Trus Joist and later VP of marketing for Weyerhaeuser’s iLevel division. When Atlas Holdings acquired the former commercial division of Trus Joist from Weyerhaeuser in 2009, it appointed Liebich as president and CEO of the company, which they named RedBuilt.
Atlas Holdings also appointed Liebich as president and CEO of Wood Resources LLC, which later sold with two plywood mills to Boise Cascade. Atlas subsequently formed New Wood Resources with Liebich as CEO. New Wood Resources operates the long-running plywood plant in Omak, Wash., and is also building a new plywood plant in Louisville, Miss., known as Winston Plywood & Veneer.
Brian Carlson, president of OSB manufacturer Huber Engineered Woods LLC, will also join the keynoters lineup. Huber operates five OSB plants. Carlson has worked at Huber for 20 years and in various capacities prior to his promotion to president, including as product and field sales director, VP of sales & marketing and overseeing business development and strategy.
The remaining keynoters as well as the complete agenda of speakers and technical session topics will be released in September.
As of early August, numerous equipment and technology companies had already signed on as exhibitor sponsors of PELICE. Leading the way is Babcock & Wilcox MEGTEC, which is a Gold sponsor not only for PELICE, but for the preceding Wood Energy Conference & Expo.
Early Silver sponsor exhibitors for PELICE include Baumer Inspection, Biele Wood, Brunette, Cogent Industrial Technologies, Con-Vey, Dieffenbacher, Electronic Wood Systems, Evergreen Engineering, GP Chemicals, Globe Machine Manufacturing, Hexion, Imal-Pal, M-E-C, Merritt Machinery/Meinan Machinery, Mid-South Engineering, MoistTech, Raute, Sweed Machinery, TSI/ Sigma Thermal, USNR, Venango Machine, Veneer Services, Westmill Industries, Willamette Valley, as well as Bronze sponsors Ventek and GreCon. (Brunette, Cogent, Con-Vey, Dieffenbacher, Evergreen Engineering, GreCon, Imal-Pal, M-E-C, Mid-South Engineering, MoistTech, TSI-Sigma Thermal, Veneer Services/Biomass Engineering & Equipment will also join B&W MEGTEC as exhibitors in the Wood Energy Conference & Expo.)
For more information visit https://pelice-expo.com/.
by Web Editor | Aug 10, 2015 | News
Freres Lumber Co. was cited four times for safety and procedural violations uncovered during inspections launched after a worker died at its Mill City plant in September 2014, according to documents obtained by the Statesman Journal.
Bryan Dodge, a 34-year-old millwright, husband and father of four, was killed when a plywood press he was replacing a steam line for activated and pinned him between the press and a post.
According to a citation and notification of penalty report from the Oregon Occupational Safety and Health Division, the machine lockout procedures that prevent equipment operation were not followed. The company did not have or follow uniform lockout procedures for operating or servicing the press.
Freres Lumber, a plywood and veneer producer since 1922, allegedly violated safety rules at least 14 times in the last 10 years, according to inspection data. The company was fined and cited in 2005 after an employee lost part of his hand while attempting to free debris from a wood chipper. In 2007, a $5,000 fine was levied and later dismissed by the Workers’ Compensation Board after a worker flagging log trucks was killed when a log truck backed up over him. In 2013, an employee operating a scissor lift was seriously injured when the lift malfunctioned, pinning his head and neck against the ceiling, leaving him with a broken jaw and vertebra.
From the Statesman Journal: https://www.statesmanjournal.com/story/news/2015/08/06/freres-lumber-cited-multiple-times-worker-death/31201141/
