by Web Editor | Dec 10, 2018 | News
SGS has announced that it has become the first third-party certifier (TPC) to be accredited by the Hong Kong Accreditation Service (HKAS). This an award secures its long-term capability for the testing and certification of composite wood products for the U.S. market.
The Hong Kong Accreditation Service is an accreditation body recognized by the U.S. Environmental Protection Agency to provide services under the Formaldehyde Emission Standards for Composite Wood Products Rule.
Achieving additional TPC accreditation requirements secures SGS’s position in the certification of composite wood products for the U.S. market beyond March 22, 2019 and further positions SGS as a global leader in certifying these products and related services.
In the United States, formaldehyde emissions from composite wood products are governed by the Formaldehyde Standards for Composite Wood Products Act, which is administered by the EPA.
Signed into law in July 2010, this legislation was and became the amendment and Title VI of the ‘Toxic Substances Control Act’ (TSCA). It contains requirements for composite wood panel manufacturers, fabricators of finished goods, and importers, distributors and retailers of composite wood panels and finished goods.
Read more on this from Woodworking Network at https://www.woodworkingnetwork.com/news/woodworking-industry-news/sgs-hong-kong-certifies-composite-wood-products-us-market?ss=news,news,woodworking_industry_news,news,almanac_market_data,news,canadian_news.
by Web Editor | Jul 7, 2017 | News
After receiving negative feedback from the industry, the Environmental Protection Agency (EPA) withdrew its Direct Final Rule Wednesday, removing delayed compliance dates for certain formaldehyde emissions standards on wood products.
“Since the direct final rule and proposed rule’s publication, EPA has received several comments on the proposed amendments to the compliance dates that the agency considers to be adverse,” the agency said.
Published in May, the Direct Final Rule gave the composite wood industry more time to comply with certain standards, including extending the deadline to meet emissions standards, record keeping provisions and labeling rules:
• Emissions, recordkeeping and labeling provisions – March 22, 2018
• Import certification – March 22, 2019
• Laminated products – March 22, 2024
The rule also proposes to extend the transitional period for CARB-certified third-party certifiers (TPCs) to March 22, 2019.
The EPA will instead proceed with a final rule based on its proposed rule published on May 24 after considering all public comments.
From Woodworking Network: https://www.woodworkingnetwork.com/news/woodworking-industry-news/epa-withdraws-final-rule-delay-formaldehyde?ss=news,news,woodworking_industry_news,news,almanac_market_data,news,canadian_news
by Web Editor | May 26, 2017 | News
EPA issued a proposed Direct Final Rule, concerning formaldehyde emission standards for composite wood products, extending all of the TSCA Title VI compliance deadlines to account for the delays to the originally published effective date. The rule was published in the Federal Register May 24. The new compliance dates are as follows:
• Emissions, recordkeeping and labeling provisions – March 22, 2018
• Import certification – March 22, 2019
• Laminated products – March 22, 2024
The rule also proposes to extend the transitional period for CARB-certified third-party certifiers (TPCs) to March 22, 2019.
This proposed rule will enter into effect within 45 days of publication in the Federal Register if EPA does not receive any adverse comment within 15 days.
“The federal regulation that definitively addresses formaldehyde emissions from composite wood products sold in the United States was first published in the Federal Register on Dec. 12, 2016, by the U.S. Environmental Protection Agency. If properly enforced, the regulation can ensure that all products – both domestic and imported composite wood panels and the finished products containing them – meet the world’s most stringent standards for formaldehyde emissions. It also marks the culmination of over 30 years of product stewardship by the composite wood industry, which through voluntary efforts and consistent and progressive work with regulators, has successfully developed products that consistently meet or exceed these tough standards,” said Jackson Morrill, president of the Composite Panel Association.
From Woodworking Network: https://www.woodworkingnetwork.com/news/woodworking-industry-news/epas-final-rule-extends-formaldehyde-compliance-dates?ss=news,news,woodworking_industry_news,news,almanac_market_data,news,canadian_news
by Web Editor | Nov 4, 2016 | News
The US Environmental Protection Agency (EPA) has finalized the new rules on formaldehyde emissions for manmade wood products. Under the new regulations, Third Party Certification (TPC) bodies currently approved to provide certification for the California Air Resources Board (CARB) formaldehyde standards will be entitled to provide certification for the new Toxic Substances Control Act (TSCA) formaldehyde emissions standard. Permission will be granted for a period of two years without the requirement for further approval. After this period, TPC will require accreditation by the EPA for TSCA Title VI certification.
The grace period will make it easier for manufacturers seeking a certified TPC and benefits continuity as the new set of rules, entitled 40 CFR 770, are based on CARB standards. The Formaldehyde Standards for Composite Wood Products Act, signed by President Obama in July 2010 amended the TSCA with the addition of Title VI and required the EPA to create regulations on formaldehyde in manmade wood products. After a lengthy period of consultation, new rules have been announced, which will come into effect one year after publication in the Federal Register.
Regulations 40 CFR 770 stipulate requirements for product labeling, compliance documentation, and for the conditions for approval of TPC and Accreditation Bodies (AB). The regulations also set out the requirements for formaldehyde emissions from composite wood products, component parts and finished goods.
Composite wood producers need to be certified through a program that includes product testing for emission standards and production facility inspections, including requirements for processes and record keeping. The emission standards are based on test method ASTM E1333-10.
From OpenPR: https://www.openpr.com/news/377699/CARB-Approved-TPC-Bodies-Can-Provide-Certification-on-New-US-Formaldehyde-Emissions-Standards.html
by Web Editor | Mar 27, 2015 | News
From: Panel World Staff
In response to the CBS 60 Minutes news story on formaldehyde emissions that aired March 1, Composite Panel Association developed a new information resource that provides the North American marketplace assurance that CPA-certified composite panels, and products made with those panels, do indeed comply with the California Air Resources Board (CARB) regulation.
To help protect U.S. consumers and eliminate confusion in the North American marketplace, CPA is working with the Federal Wood Industries Coalition (FWIC) to encourage the U.S. EPA to finalize their national regulation on emissions from composite panels that is now almost three years past the statutory deadline. It is important that EPA finalizes its regulation so that finished goods made with composite panels, made domestically or internationally, are regulated nationwide, CPA states.
In addition, CPA continues to work closely with CARB to ensure harmonization between California regulation, currently being amended, and EPA’s new regulation. CPA’s newest resource titled, “A Message from CPA About Formaldehyde Emissions,” is intended to provide customers, distributors, retailers and end-users of CPA-certified panels the confidence that panels labeled as compliant meet or exceed the CARB regulation.
The paper states that CPA has served as a TPC (third party certifier) and is accredited by the American National Standards Institute (ANSI) and by ANSI-ASQ National Accreditation Board (ANAB) (formerly ACLASS) as a certification and inspection body. It also operates a state-of-the-art testing facility also accredited by ANAB, with yearly assessments.
Read more on this story in the May 2015 issue of Panel World…
