Freres Lumber Builds For The Future With New Mass Plywood Panels

Freres Lumber Builds For The Future With New Mass Plywood Panels

 

Tyler Freres, vice president of sales for Freres Lumber Co., walked through a new manufacturing plant between Mill City and Lyons, off of Cedar Mill Road, and pointed out a stack of wood panels destined for Oregon State University this week. “I don’t even think we’ve started to tap the products and the projects we can make out of this,” Freres said.

Freres Lumber Co.’s mass plywood panels were certified for use at the end of July, and the product is already being used in buildings and for other construction purposes. And Freres is thinking big. “We have quite a bit of projects in the works, probably 14 to 16 projects quoted,” said Freres, whose ideas led to the creation of the mass plywood panels by his family’s company.

The OSU shipment is the final delivery of the panels to be used in two new buildings that will form the Oregon Forest Science Center on campus, which is estimated to cost $80 million and scheduled to open in the fall of 2019.

The mass plywood panels will be used for the roof of the George W. Peavy Forest Science Center, and for the interior and exterior walls of the nearby A.A. “Red” Emmerson Advanced Wood Products Laboratory.

Both buildings are showcasing innovative wood products made in Oregon, and the mass plywood panels are the latest entry into the market. Freres Lumber was only the third United States producer of mass timber panels to meet the Engineered Wood Association’s standards.

From the Corvallis Gazette-Times: gazettetimes.com.

RELATED ARTICLES

PANEL WORLD SEPTEMBER 2020

FRERES HAS TAIHEI HORIZONTAL PRESS GOING

 

Latest News

Vecoplan AG Announces New CEO

Vecoplan AG Announces New CEO Following Eric Jaschke's appointment to Chief Financial Officer (CFO) in December 2025, Vecoplan AG has also...

Find Us On Social

Newsletter

The monthly Panel World Industry Newsletter reaches over 3,000 who represent primary panel production operations.

Subscribe/Renew

Panel World is delivered six times per year to North American and international professionals, who represent primary panel production operations. Subscriptions are FREE to qualified individuals.

Advertise

Complete the online form so we can direct you to the appropriate Sales Representative. Contact us today!

OSU Gets Grant For Cross-Laminated Timber Research

OSU Gets Grant For Cross-Laminated Timber Research

 

Oregon Senators Jeff Merkley, the top Democrat on the Senate Appropriations Agriculture subcommittee, and Ron Wyden announced Thursday that a nearly half-million dollar U.S. Department of Agriculture grant was awarded to Oregon State University for research on the durability of cross-laminated timber, an innovative product that is helping to advance wood as a construction material for tall buildings.

“We have been working to establish Oregon as a hub for mass timber products, using local timber and bolstering our forest products economy,” said Merkley, who each year on the Appropriations Committee has fought to fund this important grants program.

“This research at OSU supports the innovative manufacturing that helps to create jobs in the rural part of the state, and lays the groundwork for tall wood building construction in urban parts of the state. I will continue to use my seat on the appropriations committee to get this important research and development funded.”

“Oregon is leading the way in developing state-of-the-art timber products that are revolutionizing our nation’s construction industry,” Wyden said. “This funding supports the ongoing research and innovative work Oregon State University is doing to ensure timber products can continue to spark economic growth and create good-paying jobs across Oregon.”

“Oregon State University is at the forefront of research to inform engineering design guidelines for cross-laminated timber structural systems,” said Anthony S. Davis, Acting Dean of the Oregon State University College of Forestry. “This grant award is another example of the excellent research done by scientists affiliated with OSU and the TallWood Design Institute.

Read more on this from KTVZ 21 News at ktvz.com

 

Latest News

Vecoplan AG Announces New CEO

Vecoplan AG Announces New CEO Following Eric Jaschke's appointment to Chief Financial Officer (CFO) in December 2025, Vecoplan AG has also...

Find Us On Social

Newsletter

The monthly Panel World Industry Newsletter reaches over 3,000 who represent primary panel production operations.

Subscribe/Renew

Panel World is delivered six times per year to North American and international professionals, who represent primary panel production operations. Subscriptions are FREE to qualified individuals.

Advertise

Complete the online form so we can direct you to the appropriate Sales Representative. Contact us today!

CLT Panel Fails During OSU Construction Project

From: Panel World Editors

Officials with Oregon State University are investigating a construction incident when a CLT panel failed in mid March at a campus building project. A 4×20 ft. panel, part of the sub flooring between the building’s second and third floors, gave way after delaminating on one end. No construction personnel were in the area and no one was injured. The panel was replaced, other sections of CLT sub flooring were shored up, and work was halted on other CLT sections.

Steve Clark, OSU vice president of marketing and university relations, said the university is bringing in an outside engineering firm to determine cause of the failure and whether any other CLT portions of construction were at risk of failure, and CLT work will resume once any issues are addressed. Ironically, the new Peavy Hall building is home to OSU’s renowned College of Forestry, and the building is designed to showcase Oregon’s forest industry and the relatively new (in North America) mass timber construction movement. However, Clark says project managers “have the utmost confidence in CLT” and plan to finish the project as designed using CLT. The project’s CLT panels are being supplied by D.R. Johnson Lumber of Riddle, Ore., which was the first U.S. producer to gain CLT certification in 2016.

OSU & D.R. Johnson Work Together To Produce Cross-Laminated Timber

Thanks to a partnership with the Oregon State University College of Forestry, D.R. Johnson Wood Innovations in Riddle, Oregon, recently became the first U.S. certified manufacturer of cross-laminated timber.

Cross-laminated timber (CLT) is a massive structural composite panel product usually consisting of three to nine layers of dimensional timber arranged perpendicular to each other, much like layers of veneer in plywood and can be used as prefabricated wall, floor and roofing elements in residential, public and commercial structures. It is extremely strong and flexible, making it resilient to seismic activity.

Lech Muszyński, assistant professor of wood science and engineering, first saw CLT in production during his 2009 sabbatical in Austria. He says those facilities were unlike anything he had ever seen.

“I decided to visit as many as I could because the diversity was astounding,” Muszyński says. “I learned that you don’t need to be a big operation to make a difference in the market.”

Once back at OSU, Muszyński began making the rounds to industry partners to gauge their interest in constructing CLT test panels. He had little success until a meeting of the college’s Board of Visitors. Valarie Johnson, president of D.R. Johnson Lumber was in the room.

From Oregon State University: https://www.forestry.oregonstate.edu/osu-dr-johnson-work-together-produce-cross-laminated-timber

Permit Approved For Nation’s First All-Wood High-Rise In Oregon

Officials in Oregon have approved construction permits for the first all-wood high-rise building in the nation. Construction on the 12-story building, called Framework, will break ground this fall in Portland’s trendy and rapidly growing Pearl District and is expected to be completed by the following winter.

The decision by state and local authorities to allow construction comes after months of painstaking testing of the emerging technologies that will be used to build it, including a product called cross-laminated timber, or CLT.

To make CLT, lumber manufacturers align 2-by-4 boards in perpendicular layers and then glue them together like a giant sandwich before sliding the resulting panels into a massive press for drying. The resulting panels are stronger than traditional wood because of the cross-hatched layers; CLT can withstand horizontal and vertical pressures similar to those from a significant earthquake with minimal damage. They also are lighter and easier to work with than regular timber, resulting in lower cost and less waste.

For this project, scientists at Portland State University and Oregon State University subjected large panels of CLT to hundreds of thousands of pounds of pressure and experimented with different methods for joining them together. The project materials also underwent extensive fire safety testing and met fire codes.

State officials hope the building will stir greater interest in high-rise construction using mass timber and help revitalize the state’s lagging logging industry. Logging, once a major source of revenue in Oregon, has dropped sharply in the past few decades because of greater environmental protections for salmon and the spotted owl. The loss of the industry has devastated some of the state’s rural communities.

From The Register-Guard: https://registerguard.com/rg/news/local/35651365-75/portland-approves-permit-for-nations-first-all-wood-high-rise.html.csp