by Web Editor | Jun 8, 2015 | News
Tall wood buildings proponent and famed architect Michael Green teamed with Finnish timber and panel maker Metsä Wood to redesign the iconic Empire State Building in timber frame construction.
Part of Metsä Wood’s Plan B campaign to educate the public on the importance of wood in construction, the company says that wood should always be considered as a serious option in everything from design to construction and also in buildings in which wood hasn’t been previously used. The Plan B campaign re-engineers famous buildings – another project redid the Roman Coliseum – using engineered beams and panel instead of steel, stone and concrete. Metsä produces laminated veneer lumber – LVL – among many other high-strength wood construction lumber and panel products.
Green and his architectural design firm MGA created the design and construction plans for the wooden version of the Empire State Building.
“We designed a skyscraper using Metsä Wood’s Kerto LVL engineered wood as the main material from floors to column spacing,” Green said. “I believe that the future belongs to tall wooden buildings. Significant advancements in engineered wood and mass timber products have created a new vision for what is possible for safe, tall, urban wood buildings. The challenge now is to change society’s perception of what’s possible. In fact, this is the first new way to build a skyscraper in the last 100 years.”
From Woodworking Network: https://www.woodworkingnetwork.com/iconic-empire-state-building-gets-wood-makeover?ss=news,woodworking_industry_news
by Web Editor | May 29, 2015 | News
North American production of engineered wood products (EWP) declined again in the first quarter of 2015.
In spite of a customary seasonal revival compared to the previous quarter, production volumes of LVL and I-joists were down year on year. The weakening trend already seen in the fourth quarter of 2014 has therefore continued.
While the reason quoted for production cutbacks at the end of 2014 had been primarily the slow recovery of the business situation in new residential building and adjustments to stock, the weak start to 2015 has been partly blamed on the cool weather prevailing in most of the eastern federal states.
North American LVL production has declined year on year by 3%. A moderate minus of 1% in the USA is contrasted by a sharp fall of 17% in Canada.
From EUWID: https://www.euwid-wood-products.com/news/wood-based-panels/single/Artikel/north-america-ewp-production-declines-further.html
by Web Editor | May 20, 2015 | News
PFS Corp. and Timberco, Inc. (TECO), two third-party certification agencies that have been linked for almost 25 years, have merged as of May 1, the company said in the press release received by Lesprom Network.
On May 1, 2015, Jim Husom, President and CEO of PFS Corporation, and Steve Winistorfer, President and CEO of TECO, signed papers merging the two companies. In announcing the merger, Jim Husom commented, “This merger combines what have been two well-respected and successful companies into one; and as one, we’ll be able to provide even more effective and efficient service to our existing clients and grow our business more than we could individually.”
The two companies together provide certification and testing services for more than a dozen different building products, including engineered wood products like LVL, I-joists, and glued laminated timber; plus SIPs (structural insulated panels), OSB (oriented strand board), softwood and hardwood plywood, metal plate connected wood trusses, adhesives, pre-cast concrete panels, hearth products, and construction fasteners for approximately 500 manufacturing plants.
Their testing laboratories, located in Wisconsin and Oregon, perform a variety of structural tests, durability tests, formaldehyde emissions tests, and some fire tests. The PFS Manufactured Structures Division provides design approval and factory inspections to over 120 HUD Code and modular building factories in 39 states and Canada.
From Lesprom Network: https://www.lesprom.com/en/news/PFS_Corporation_and_TECO_merge_67829/
by Web Editor | Apr 10, 2015 | News
Boise Cascade will make a $43 million capital investment to upgrade and increase capacity at its Florien, Louisiana, plywood mill located in the state’s Northwest Region. The Florien mill is one of three major manufacturing sites Boise Cascade operates in Louisiana. Other locations include a plywood mill in Oakdale and an engineered wood products mill in Alexandria. The expansion is scheduled to begin this summer.
In Florien, Boise Cascade will replace two dryers and substantially increase its capacity for manufacturing veneer products, with the company also adding log yard storage space and new press equipment that will boost capacity. The Florien mill supplies veneer for Boise Cascade’s Alexandria engineered wood products mill, where the company produces such items as I-joists and laminated veneer lumber. The company also produces veneer for plywood manufactured in Florien and Oakdale and used for concrete forms, sheathing and subfloors.
“Having spent the last seven years of my career working with our employees at our three Louisiana locations, I am very pleased to have Boise Cascade invest in its future here and in the future of our Louisiana employees,” Boise Cascade’s Mike Brown, Wood Products operations manager said. “With over 1,150 Louisiana employees and a Louisiana payroll of over $3.8 million per month, Boise Cascade sees Louisiana as an integral part of the company’s future. This investment will enable us to continue to provide great jobs for Louisianians starting almost immediately.”
The company is expected to utilize Louisiana’s Industrial Tax Exemption incentive. After beginning the expansion this summer, Boise Cascade anticipates completion of the dryer installations by the end of 2016 and completion of the additional upgrades in 2017.
From Area Development: https://www.areadevelopment.com/newsItems/4-10-2015/boise-cascade-upgrades-florien-louisiana-plywood-mill677788.shtml
by Web Editor | Mar 23, 2015 | News
Stora Enso has ordered the bulk of the machinery for an LVL project planned in Varkaus, Finland from Finnish machinery and plant producer Raute. Raute said that the order had a total volume of about €30m and includes the complete LVL production line with a peeling line, drying, veneer sorting and splicing, gluing, pre-press, press, order picking and packaging. Raute said that the 8 x 80 ft three-opening press has a capacity of about 100,000 m³ per year. Stora Enso said that the mill would reach full capacity by 2019. Start-up is scheduled for some time in the second quarter of 2016.
From EUWID: https://www.euwid-wood-products.com/news/roundwoodsawnwood/single/archive/2015/march/Artikel/stora-enso-orders-lvl-line-from-raute.html
