Engineered Lumber Has Replaced Natural Lumber In Key Building Components

Building a house, garage or even a shed today isn’t as easy as going to the local lumberyard and buying whatever dimension of wood you need. A lot of emphasis goes into the grade of the wood and its stress and load ratings, according to Everett Brands, manager of Arrow Building Center in Glencoe. Arrow took over the former Fullerton Lumber Center on Desoto Avenue this past October.

Today, main structural pieces, such as headers, consist of LVL, or laminated veneer lumber, an engineered product typically of poplar, fir or pine. It is laminated under heat and pressure with a moisture-resistant resin and it’s stronger than typical native wood. Building codes call for the use of specific lumber grades for specific applications.

“Anything longer than six feet as a header has to be LVL,” Brands said. The LVL products range up to 36 or 48 feet long. While regular lumber could sag or bow under extreme weight, the LVL won’t. Thus LVL is typically used over windows and entries, especially with tall entries.

“We use a lot of engineered products — beams, headers and I-joists,” added Matt Smieja, manager of Simonson Lumber, just outside Hutchinson along State Highway 7 East.

Years ago, when forests were being cut for the first time, the wood tended to be of higher quality as far as grain and knots. But new stands of trees generated are of a lower grade.

From the Hutchinson Leader: https://www.crowrivermedia.com/hutchinsonleader/news/business/engineered-lumber-has-replaced-natural-lumber-in-most-key-building/article_67ee0dc7-e4d8-56c8-932e-9ca668bb40bc.html

CLT Creates New Opportunities For Hardwoods

CLT Creates New Opportunities For Hardwoods

The latest UNECE Forest Products Annual Market Review highlights the rapid growth in the market for cross laminated timber (CLT) and the new opportunities the product creates for wood, including hardwood, to compete in high-end structural applications. Although the first CLT production facilities were constructed in the DACH countries (Germany, Austria and Switzerland) in 1994, the full potential is only now being realized following a long period of technical and market development.

CLT first entered the building market during the 2005 to 2010 period, transforming from a small-scale niche product into large-scale industrial production. CLT panels consist of several layers of structural lumber boards stacked crosswise (typically at 90 degrees) and glued together on their wide faces and, sometimes, on the narrow faces as well. In special configurations, consecutive layers may be placed in the same direction to obtain specific structural characteristics. CLT products are usually fabricated with three to seven layers, but with additional layers in some cases.

Thickness of individual lumber pieces typically varies from 16 mm to 51 mm and width varies from 60 mm to 240 mm. Boards are finger-jointed using structural adhesive. Lumber is visually-graded or machine stress rated and is kiln dried. Panel sizes vary by manufacturer; typical widths are 0.6m, 1.2m, and3 m, while length can be up to 18m and thickness up to 508 mm.

The dimensions and lay-up of CLT production are now internationally standardized and recognized, and production techniques are optimized in modern manufacturing facilities. CLT is designed to maximize yield, utilize lower grades of lumber, and it can be made in a high volume of very large sections.

The result is a light but very strong panel product that can be made off-site and erected quickly to form structural walls, floors and ceilings. CLT is used in a wide range of applications in single-family houses, multi-story towers, public buildings and specialty construction.

From FORDAQ: fordaq.com.

 

Latest News

Webster Industries Purchases Renold

Webster Industries Purchases RenoldMPE Partners along with its portfolio company, Webster Industries, announced the closing of its acquisition of...

Sunds Fibertech Opens U.S. Office

Sunds Fibertech Opens U.S. OfficeSunds Fibertech is taking a major step in its growth journey by opening its first U.S. office in Atlanta, Ga.,...

Find Us On Social

Newsletter

The monthly Panel World Industry Newsletter reaches over 3,000 who represent primary panel production operations.

Subscribe/Renew

Panel World is delivered six times per year to North American and international professionals, who represent primary panel production operations. Subscriptions are FREE to qualified individuals.

Advertise

Complete the online form so we can direct you to the appropriate Sales Representative. Contact us today!