by Web Editor | Mar 19, 2018 | News
Forisk projects U.S. softwood lumber consumption of 49.8 BBFT in 2018. This represents a 3.7% increase from our 2017 forecast of 48.1 BBFT and is 5.4% higher than 2016 actuals of 47.3 BBFT. Softwood lumber consumption increased every year since 2009, but remained 26.4% below the 2005 consumption high of 64.2 BBFT. U.S. softwood lumber production is forecasted to increase 5.0% to 35.6 billion board feet in 2018. The South drives this growth with production expected to rise 6.4% for the year, reaching 19.5 BBFT. This would be a new high for the region, surpassing the 19.0 BBFT of production in 2005. In the Base Case, the South’s share of national lumber production increases 0.8% to 55% in 2018.
We project U.S. softwood lumber self-sufficiency to reach 71.4% in 2018 as imports level off, and U.S. softwood production increases relative to consumption. We expect net imports to remain stable in 2018 due to physical constraints on Canadian lumber producers and their inability to grow exports to the U.S.: raging wildfires; stagnant softwood lumber capacity; increasing domestic softwood consumption; two new tariffs imposed on Canadian softwood lumber imports in 2017; and reductions in annual allowable cuts.
In the Forisk Base Case, total structural panel consumption increases from 31.2 billion square feet in 2017 to 36.6 billion square feet by 2022, increasing at a compound annual growth rate of 3.3%. OSB consumption is forecasted to rise 3.1% over 2017, while plywood consumption is forecast to increase 2.1%. For context, our October 2017 forecast was 3.5% lower than actuals, while our initial January 2017 forecast came in at 0.9% below actuals.
Each year we update a multi-phased study for estimating U.S. structural panel consumption. We test variables such as housing starts, GDP, population and others. Outputs from all approaches – regardless of the approach, variables, or form – tend to correlate highly with each other. Simpler models performed better; our final model had an R-squared of 0.97. Then, we evaluate results of our model relative to history and research by the USDA Forest Service and APA-The Engineered Wood Association prior to incorporating the projections into price forecasts for timber and delivered logs across the U.S.
From FORISK Consulting: https://forisk.com/blog/2018/03/15/forisk-research-quarterly-frq-excerpt-2018-lumber-structural-panel-projections/
by Web Editor | Feb 7, 2018 | News
Panel producer Norbord has posted record earnings in 2017 for its worldwide business. The company also achieved record production at nine of its 15 mills, while the Inverness OSB expansion project was also completed.
Peter Wijnbergen, Norbord’s president and CEO, described 2017 as an outstanding year, with record adjusted earnings before interest, tax, depreciation and amortisation (EBITDA) of US$672m. “US housing starts continued to improve, led by stronger growth in the single-family segment, driving increased North American OSB demand and prices,” he said. “Our European business had another solid year due to record sales volumes and improved prices for all our panel products across our key markets.”
He highlighted “great momentum” moving into 2018, with demand in all its core markets remaining strong.
“Meanwhile, our European business is poised for improved earnings next year as OSB substitution for plywood drives accelerated demand growth in our core UK and German markets.”
In Europe, shipments increased 5% over the prior year, with its mills running at 99% of capacity in 2017. In local currency terms, full-year average panel prices improved 11% from 2016.
From Timber Trades Journal: https://www.ttjonline.com/news/strong-panels-markets-boost-norbord-earnings-6046604/
by Web Editor | Dec 13, 2017 | News
The likelihood of strong profits from the wood products business, alongside higher prices and growth in paper packaging from increased e-commerce demand, will help to offset the secular declines in the printing and writing paper segment, says Moody’s Investors Service in its annual sector outlook published recently. As a result, the outlook for the global paper and forest products sector will remain stable in 2018.
“The stable outlook for paper and forest products globally next year is underpinned by an expected 2%-4% growth of our rated paper and forest products companies, as strength in the wood products and paper packaging subsectors offset decreased demand for commodity paper as the shift to digital-first alternatives continues,” says Ed Sustar, a Moody’s Senior Vice President and author of the report.
On a subsector basis, the positive outlook for wood products and timberland is buoyed by improving strong end-market demand for timber, lumber, oriented strand board (OSB) and engineered wood products as US housing starts increase about 6%, or approximately 1.28 million units, in 2018.
Bolstered by the robust demand emanating from the US homebuilding market, average lumber prices are expected to remain strong, with increased production capacity aligning to support the demand, Moody’s says. Nevertheless, analysts caution that the tight lumber markets will allow countervailing anti-dumping duties assessed on Canadian lumber exported to the US to be passed on to consumers. The issuers most expected to benefit from a combination of higher lumber prices and little-to-no lumber tariffs include Potlatch Corporation, Georgia-Pacific, Weyerhaeuser Company and Rayonier Inc.
From Moody’s Investors Service: https://www.moodys.com/research/Moodys-Wood-product-growth-supports-2018-stable-outlook-offsetting-commodity–PR_377021
by Web Editor | Jul 12, 2017 | News
Oregon-based Roseburg Forest Products will expand its operations in the southeastern United States with construction of a new engineered wood products plant in Chester, S.C. Roseburg publicly announced the project July 11 at a joint news conference with officials representing the state of South Carolina and Chester County.
“This is an exciting strategic growth opportunity in a business that has done well for us,” Roseburg President and CEO Grady Mulbery said. “With the continued increase in housing starts in the southeastern U.S., we see ongoing demand growth for engineered wood products in the region and elsewhere. We are grateful to state and local officials in Chester for their hard work and collaborative efforts to facilitate this project.”
Groundbreaking on the planned state-of-the-art manufacturing facility is expected in early 2018, with anticipated operation start-up in mid-2019. Once completed, the plant will create 148 full-time jobs.
“This new plant will be the most technologically advanced manufacturing facility of its kind in the world with the highest capacity continuous LVL press in the world,” said Steve Killgore, Roseburg’s Senior Vice President of Solid Wood Business. “Expanding our manufacturing capacity in this way allows us to meet growing customer demand for a versatile product that combines the best of modern processing technology and structural capability.”
The new plant will make Roseburg the largest U.S. manufacturer of engineered wood products serving independent distributors without captive distribution. Roseburg first established its engineered wood products business in 2001 and currently manufactures RFPI Joists, RigidLam LVL and RigidRim Rimboard at its plant in Riddle, Ore.
Read more on this from Roseburg Forest Products at https://www.roseburg.com/News/Details/new-south-carolina-plant/.
by Web Editor | Sep 12, 2016 | News
Like much of the industry, engineered wood producers are still navigating a fickle recovery in which builders are challenged by supply constraints, tight lending, and hard-to-come-by lots. Though the market is emerging from the recession, it’s still on the slow side.
“The demand is there for 1.5 million housing units. We’re not meeting that,” says Joe Elling, director of market research for APA–The Engineered Wood Association. Production is up on a year-ago basis, “but starts could be stronger if some of these supply-side constraints were not as binding,” Elling says. “I anticipate a modest improvement in the second half of the year, but it’s still going to be agonizingly slow going forward.”
For engineered lumber manufacturers and the dealers who sell their products, the slow recovery presents both challenges and opportunities. Along with the obvious—a slower return to at-peak sales—the ongoing labor shortages have created an even stronger need for product education. At the same time, those labor constraints provide even more motivation toward using engineered products that boost efficiencies and cut back on waste.
Overall, the industry has seen a positive boost in public opinion toward wood products, be they engineered or otherwise, as high-profile projects showcase their capabilities, beauty, and warmth.
“One of the biggest things in the forest products industry today that affects EWP the most is the general feeling in the world that wood is good,” says Mike McCollum, director of engineered wood business at Roseburg. “Wood is now the first choice in everybody’s eyes. Its sustainability, its efficiencies, its workability, its natural warmth, along with the fact that it is easy to design with and easy to build with…everyone has been awakened to this idea that wood is good. Then, when you take it to the next step, everything that engineered wood brings to the construction market is highlighted even more.”
From LBM Journal: https://www.lbmjournal.com/in-depth-engineered-lumber-2/