by Web Editor | Apr 6, 2018 | News
If you manufacture finished goods that contain particleboard, medium density fiberboard (MDF) or hardwood plywood (HWPW), then you likely have been preparing to comply with the Environmental Protection Agency’s (EPA’s) Formaldehyde Emissions Standards for Composite Wood Products rule. If this is the first time you have heard of this Regulation, known also as “TSCA Title VI” after the statutory authority for the regulation, there is still time to prepare for compliance, but time is of the essence. This article provides a general outline of the TSCA Title VI requirements applicable to manufacturers of finished products containing composite wood panels, as well as the key dates for compliance, which have only just been finalized through recent litigation.
TSCA Title VI covers all finished goods and component parts made with particleboard, MDF and HWPW. Fabricators that make component parts using a wood or woody grass veneer (such as bamboo) attached to a composite wood core that is later used in a finished product may also meet the definition for “laminated product” producers, which triggers several additional requirements starting March 22, 2024. TSCA Title VI does include a “de minimis” exemption for finished goods or component parts sold directly to end users if its composite wood content does not exceed 144 square inches on its largest face. This exemption applies only to labeling; products such as small picture frames and others that meet the de minimis definition must still be made with compliant composite wood and comply with recordkeeping requirements.
The central requirement for manufacturers of finished goods is that they use compliant composite wood and that this is documented throughout the supply chain. On March 13, 2018, the U.S. District Court for the Northern District of California issued an order altering many TSCA Title VI compliance dates, including those related to sourcing. Fabricators must either begin using TSCA Title VI certified composite wood panels in all component parts and finished goods by June 1, 2018, or be able to prove that the composite wood panels or component parts were manufactured before, or were in inventory prior to, that date. The Court has now also allowed California Air Resources Board Airborne Toxic Control Measure Phase 2 (“CARB 2”) certified composite wood panels to be considered TSCA Title VI compliant until March 22, 2019.
Read more on this from Woodworking Network at https://www.woodworkingnetwork.com/management/quickguide-to-epa-formaldehyde-regulation-what-woodworkers-need-know?ss=news,news,woodworking_industry_news,news,almanac_market_data,news,canadian_news.
by Web Editor | Nov 6, 2017 | News
The Kitchen Cabinet Makers Association (KCMA) may come to the defense of the Environmental Protection Agency (EPA) after various non-profit organizations throughout Louisiana announced they would sue the EPA for stalling its formaldehyde rule enforcement.
Through the lawsuit, Louisiana-based NGOs Sierra Club and Earthjustice are demanding the EPA be prevented from extending compliance with new regulation. Both groups survived Hurricane Katrina, in which FEMA deployed trailers containing formaldehyde-treated wood products to assist displaced victims.
“It is outrageous that people recovering from this year’s hurricanes might have to deal with the same health issues in their emergency housing that the EPA has known about — and was supposed to address — years ago,” attorney Patti Goldman said in a statement. Earthjustice published a story about their decision to sue on its website.
“Though the story is wrought with errors with respect to the alleged adverse health effects from formaldehyde exposure, the fact remains that a lawsuit has been filed that could impact the earlier granted extensions of the compliance dates to December 12, 2018,” said the KCMA in its newsletter. “KCMA is exploring our options and potential involvement in the suit; we will provide more details in the coming days. KCMA is also reaching out this week to related D.C. trade associations and will work with them to ensure a coordinated effort on this important issue.”
From Woodworking Network: https://www.woodworkingnetwork.com/news/woodworking-industry-news/kcma-could-defend-epa-formaldehyde-lawsuit?ss=news,news,woodworking_industry_news,news,almanac_market_data,news,canadian_news
by Web Editor | Nov 1, 2017 | News
The Environmental Protection Agency (EPA) published a direct final rule October 25 to update a few voluntary consensus standards in the rule governing formaldehyde emission standards for composite wood products.
The direct final rule corrects the rule at 40 CFR 770.20(b) by allowing the formaldehyde emissions mill quality control test methods to correlate to either the ASTM E1333-14 test method, or if shown to be equivalent, the ASTM D6007-14 test method. This correlation was inadvertently omitted from the original final rule, EPA wrote.
The correction aligns the mill quality control testing requirements with the California Air Resources Board standards allowing mill quality control tests to be correlated to the less expensive ASTM D6007-14 test method.
These updates apply to emission testing methods and regulated composite wood product construction characteristics. The voluntary consensus standards were updated, withdrawn or superseded to because of new information, technology, and methodology, EPA wrote.
EPA’s final rule takes effect December 11, unless EPA receives adverse comments on it by November 9.
From Woodworking Network: https://www.woodworkingnetwork.com/wood/panel-supply/epa-publishes-final-rule-fixes-place-formaldehyde-standards?ss=news,news,woodworking_industry_news,news,almanac_market_data,news,canadian_news
by Web Editor | Sep 8, 2017 | News
The U.S. Environmental Protection Agency will issue a final rule that will extend compliance dates for the national Formaldehyde Emission Standards for Composite Wood Products, according to Furniture Today.
“As announced on its website this week, the dates will be amended as follows:
* Emission standards, recordkeeping and labeling provisions from December 12, 2017, to December 12, 2018
* Import certification provisions from December 12, 2018, to March 22, 2019
* Laminated product producer provisions from December 12, 2023, to March 22, 2024
* The conclusion of the transition period for CARB Third-Party Certifiers from December 12, 2018, to March 22, 2019
“On July 11, the EPA also published a direct final rule that would remove a provision that prohibited the early labeling of compliant products before the original December 12 deadline. As it received no adverse comments on this matter, the rule has been changed to allow companies to label compliant products before the new December 2018 deadline. That change became effective August 25, meaning that companies can begin labeling product manufactured by this date.
“The EPA said it has received no negative comments on these changes, which are being finalized as proposed.”
From Floor Daily: https://www.floordaily.net/flooring-news/epa-extends-compliance-dates-for-composite-wood-products
by Web Editor | Aug 30, 2017 | News
Engineered wood is also known as man-made wood or composite wood, and these are quite popular in recent times due to their cost effective and ecofriendly properties. These woods are formed of composite materials manufactured by binding the strands, fibers and particles all together with the help of suitable adhesives. These engineered woods can be made by utilizing wastes such as sawmill waste, rice straw, sugarcane bagasse, wheat straw and other wood wastes thus making them cost effective and environmentally friendly. Engineered wood is mainly used as a substitute to hardwood and concrete.
In many construction building projects, the products of engineered wood are used as an alternative of steel in beams. One of the advantages offered by engineered wood products is that it can be designed as per the demand and custom specifications of the end user. The main users of engineered wood products are construction developers, architects, designers etc. Promotion of green life and regulations concerning deforestation has led the global engineered wood market to expand with a decent pace.
Government norms and regulations such as Bharat stage emission standards or European emission standards regarding CO2 emissions are driving the market for engineered wood at whole different level. Owing to the factors like cost efficiency, enhanced quality, waste reduction and environmentally friendly nature, the engineered wood market is expected to witness significant growth in the market. There are certain innovations in the technologies and machining systems have been developed in order to improve the efficiency and quality of the products which are expected to further drive growth of the market.
Although the global engineered wood market has potential opportunities in the future still the manufacturers of engineered wood products face some challenges regarding durability and fire resistant properties of engineered wood products. There are certain adhesives like Urea-formaldehyde used in the manufacturing of engineered wood products which are quite toxic. Also some products such as particleboard may not be suitable for outdoor use as they are more prone to humidity. The ongoing developments regarding advanced grading and better material selection techniques is expected to result in improved definition of timber quality and efficient performance of the products.
From LANEWS.org: https://www.lanews.org/growing-industrialization-will-influence-the-engineered-wood-market-growth-2017-2027/
