by Web Editor | May 26, 2017 | News
EPA issued a proposed Direct Final Rule, concerning formaldehyde emission standards for composite wood products, extending all of the TSCA Title VI compliance deadlines to account for the delays to the originally published effective date. The rule was published in the Federal Register May 24. The new compliance dates are as follows:
• Emissions, recordkeeping and labeling provisions – March 22, 2018
• Import certification – March 22, 2019
• Laminated products – March 22, 2024
The rule also proposes to extend the transitional period for CARB-certified third-party certifiers (TPCs) to March 22, 2019.
This proposed rule will enter into effect within 45 days of publication in the Federal Register if EPA does not receive any adverse comment within 15 days.
“The federal regulation that definitively addresses formaldehyde emissions from composite wood products sold in the United States was first published in the Federal Register on Dec. 12, 2016, by the U.S. Environmental Protection Agency. If properly enforced, the regulation can ensure that all products – both domestic and imported composite wood panels and the finished products containing them – meet the world’s most stringent standards for formaldehyde emissions. It also marks the culmination of over 30 years of product stewardship by the composite wood industry, which through voluntary efforts and consistent and progressive work with regulators, has successfully developed products that consistently meet or exceed these tough standards,” said Jackson Morrill, president of the Composite Panel Association.
From Woodworking Network: https://www.woodworkingnetwork.com/news/woodworking-industry-news/epas-final-rule-extends-formaldehyde-compliance-dates?ss=news,news,woodworking_industry_news,news,almanac_market_data,news,canadian_news
by Web Editor | Nov 4, 2016 | News
The US Environmental Protection Agency (EPA) has finalized the new rules on formaldehyde emissions for manmade wood products. Under the new regulations, Third Party Certification (TPC) bodies currently approved to provide certification for the California Air Resources Board (CARB) formaldehyde standards will be entitled to provide certification for the new Toxic Substances Control Act (TSCA) formaldehyde emissions standard. Permission will be granted for a period of two years without the requirement for further approval. After this period, TPC will require accreditation by the EPA for TSCA Title VI certification.
The grace period will make it easier for manufacturers seeking a certified TPC and benefits continuity as the new set of rules, entitled 40 CFR 770, are based on CARB standards. The Formaldehyde Standards for Composite Wood Products Act, signed by President Obama in July 2010 amended the TSCA with the addition of Title VI and required the EPA to create regulations on formaldehyde in manmade wood products. After a lengthy period of consultation, new rules have been announced, which will come into effect one year after publication in the Federal Register.
Regulations 40 CFR 770 stipulate requirements for product labeling, compliance documentation, and for the conditions for approval of TPC and Accreditation Bodies (AB). The regulations also set out the requirements for formaldehyde emissions from composite wood products, component parts and finished goods.
Composite wood producers need to be certified through a program that includes product testing for emission standards and production facility inspections, including requirements for processes and record keeping. The emission standards are based on test method ASTM E1333-10.
From OpenPR: https://www.openpr.com/news/377699/CARB-Approved-TPC-Bodies-Can-Provide-Certification-on-New-US-Formaldehyde-Emissions-Standards.html
by Web Editor | Sep 19, 2016 | News
New Zealand Researchers Develop New Adhesive For Engineered Wood
Scion’s environmentally-friendly bioadhesives technology was awarded Biotechnology of the Year at NZBIO’s annual conference recently. Dr. Will Barker, Chief Executive of NZBIO, said “the technology is a game changer for wood panel manufacturers”.
The Scion bioadhesives team, led by Warren Grigsby, has developed a world first 100 percent biobased adhesive and resins for engineered wood products. Made from natural sources, such as forestry and agricultural waste, these adhesives and resins are petrochemical-free, have very low formaldehyde emissions and can be made and used in existing manufacturing operations.
“We are thrilled to receive this award. It’s a great acknowledgement. We’ve spent years mixing and matching assorted ingredients to come up with right recipe. This is the icing on the cake,” says Warren.
The technology, which has been over seven years in the making, has been trademarked and patented as ‘Ligate’. “The ‘green’ credentials of Ligate products will provide manufacturers with a competitive advantage over wood processors using conventional petrochemical-based adhesives and resins.
“Adhesives and resins made from natural sources have a lower environmental footprint and are considered more socially acceptable than their traditional formaldehyde-based counterparts,” says Warren. The technology has already attracted international interest, and next week Warren travels to Europe to further profile the technology at two international conferences.
The monthly Panel World Industry Newsletter reaches over 3,000 who represent primary panel production operations.
Panel World is delivered six times per year to North American and international professionals, who represent primary panel production operations. Subscriptions are FREE to qualified individuals.
Complete the online form so we can direct you to the appropriate Sales Representative. Contact us today!
by Web Editor | Feb 24, 2016 | News
Appalachian Hardwood Manufacturers, Inc. (AHMI), promoting the advantages of formaldehyde-free real, solid wood to public, are contrasting its natural qualities with the unsafe laminate flooring that had gotten Lumber Liquidators into trouble with consumers.
“Discount flooring companies selling imported laminate floors have been providing customers with products that can carry seven to twenty times the base amount of carcinogenic formaldehyde allowed by the EPA,” says the AHMI. “At these levels, formaldehyde secretes from the flooring and into the home’s air, becoming a high-level health risk, especially for children and pets who are most susceptible to its effects. Carcinogenic formaldehyde found in artificial wood has been linked to lung and nasal cancer, nausea, asthma, and other severe respiratory issues.”
Wood industry trade groups, including furniture and cabinetry makers, have been trying to separate their goods from the products made in China that contained high levels of formaldehyde. The Kitchen Cabinet Makers Association issued a statement last week saying that there is no risk of exposure to formaldehyde in cabinets that receive its Environmental Stewardship Program seal, because its program requires that engineered wood used in it must be CARB Compliant.
Other groups have questioned the validity of testing methods used to detect formaldehyde in wood products – such as flooring sold by online retailer Wayfair – tests that deconstruct the multi-layered sandwich that makes up laminate flooring. The Hardwood Plywood and Veneer Association estimates that “finishes of paint, lacquer, sealants, laminate, plastic or other material” reduce formaldehyde emissions of the underlying raw board by 90 percent.
From Woodworking Network: https://www.woodworkingnetwork.com/wood/pricing-supply/appalachian-hardwood-manufacturers-tout-formaldehyde-free-real-solid-wood
by Web Editor | May 20, 2015 | News
PFS Corp. and Timberco, Inc. (TECO), two third-party certification agencies that have been linked for almost 25 years, have merged as of May 1, the company said in the press release received by Lesprom Network.
On May 1, 2015, Jim Husom, President and CEO of PFS Corporation, and Steve Winistorfer, President and CEO of TECO, signed papers merging the two companies. In announcing the merger, Jim Husom commented, “This merger combines what have been two well-respected and successful companies into one; and as one, we’ll be able to provide even more effective and efficient service to our existing clients and grow our business more than we could individually.”
The two companies together provide certification and testing services for more than a dozen different building products, including engineered wood products like LVL, I-joists, and glued laminated timber; plus SIPs (structural insulated panels), OSB (oriented strand board), softwood and hardwood plywood, metal plate connected wood trusses, adhesives, pre-cast concrete panels, hearth products, and construction fasteners for approximately 500 manufacturing plants.
Their testing laboratories, located in Wisconsin and Oregon, perform a variety of structural tests, durability tests, formaldehyde emissions tests, and some fire tests. The PFS Manufactured Structures Division provides design approval and factory inspections to over 120 HUD Code and modular building factories in 39 states and Canada.
From Lesprom Network: https://www.lesprom.com/en/news/PFS_Corporation_and_TECO_merge_67829/
