by Web Editor | Dec 10, 2018 | News
SGS has announced that it has become the first third-party certifier (TPC) to be accredited by the Hong Kong Accreditation Service (HKAS). This an award secures its long-term capability for the testing and certification of composite wood products for the U.S. market.
The Hong Kong Accreditation Service is an accreditation body recognized by the U.S. Environmental Protection Agency to provide services under the Formaldehyde Emission Standards for Composite Wood Products Rule.
Achieving additional TPC accreditation requirements secures SGS’s position in the certification of composite wood products for the U.S. market beyond March 22, 2019 and further positions SGS as a global leader in certifying these products and related services.
In the United States, formaldehyde emissions from composite wood products are governed by the Formaldehyde Standards for Composite Wood Products Act, which is administered by the EPA.
Signed into law in July 2010, this legislation was and became the amendment and Title VI of the ‘Toxic Substances Control Act’ (TSCA). It contains requirements for composite wood panel manufacturers, fabricators of finished goods, and importers, distributors and retailers of composite wood panels and finished goods.
Read more on this from Woodworking Network at https://www.woodworkingnetwork.com/news/woodworking-industry-news/sgs-hong-kong-certifies-composite-wood-products-us-market?ss=news,news,woodworking_industry_news,news,almanac_market_data,news,canadian_news.
by Web Editor | Nov 12, 2018 | News
The Environmental Protection Agency (EPA) has proposed technical amendments to its formaldehyde emissions standards for composite wood products.
Published last week in the Federal Register, the proposed changes primarily address concerns over testing and certification provisions of the rule published in December 2016, which require suppliers, importers, and manufacturers of hardwood plywood, MDF, and particleboard to limit the products’ formaldehyde emissions.
The EPA proposed removing the requirement for annual correlations between third-party certifiers and other mill quality testing procedures. The changes also clarify labeling requirements.
The changes are meant to streamline compliance and align more closely with the California Air Resources Board (CARB) Toxic Control Measures (ATCM) Phase II.
Public comments from a June meeting influenced the proposed rule. The meeting was held to address technical issues, like correlation and equivalence of testing methods, how test data is treated, and handling sampling requirements. Public comments on the latest proposed changes will be accepted until December 3.
Read more on this from Woodworking Network at https://www.woodworkingnetwork.com/news/woodworking-industry-news/epa-updates-clarifies-formaldehyde-emission-standards-composite-wood?ss=news,news,woodworking_industry_news,news,almanac_market_data,news,canadian_news.
by Web Editor | Nov 1, 2017 | News
The Environmental Protection Agency (EPA) published a direct final rule October 25 to update a few voluntary consensus standards in the rule governing formaldehyde emission standards for composite wood products.
The direct final rule corrects the rule at 40 CFR 770.20(b) by allowing the formaldehyde emissions mill quality control test methods to correlate to either the ASTM E1333-14 test method, or if shown to be equivalent, the ASTM D6007-14 test method. This correlation was inadvertently omitted from the original final rule, EPA wrote.
The correction aligns the mill quality control testing requirements with the California Air Resources Board standards allowing mill quality control tests to be correlated to the less expensive ASTM D6007-14 test method.
These updates apply to emission testing methods and regulated composite wood product construction characteristics. The voluntary consensus standards were updated, withdrawn or superseded to because of new information, technology, and methodology, EPA wrote.
EPA’s final rule takes effect December 11, unless EPA receives adverse comments on it by November 9.
From Woodworking Network: https://www.woodworkingnetwork.com/wood/panel-supply/epa-publishes-final-rule-fixes-place-formaldehyde-standards?ss=news,news,woodworking_industry_news,news,almanac_market_data,news,canadian_news
by Web Editor | Sep 8, 2017 | News
The U.S. Environmental Protection Agency will issue a final rule that will extend compliance dates for the national Formaldehyde Emission Standards for Composite Wood Products, according to Furniture Today.
“As announced on its website this week, the dates will be amended as follows:
* Emission standards, recordkeeping and labeling provisions from December 12, 2017, to December 12, 2018
* Import certification provisions from December 12, 2018, to March 22, 2019
* Laminated product producer provisions from December 12, 2023, to March 22, 2024
* The conclusion of the transition period for CARB Third-Party Certifiers from December 12, 2018, to March 22, 2019
“On July 11, the EPA also published a direct final rule that would remove a provision that prohibited the early labeling of compliant products before the original December 12 deadline. As it received no adverse comments on this matter, the rule has been changed to allow companies to label compliant products before the new December 2018 deadline. That change became effective August 25, meaning that companies can begin labeling product manufactured by this date.
“The EPA said it has received no negative comments on these changes, which are being finalized as proposed.”
From Floor Daily: https://www.floordaily.net/flooring-news/epa-extends-compliance-dates-for-composite-wood-products
by Web Editor | May 26, 2017 | News
EPA issued a proposed Direct Final Rule, concerning formaldehyde emission standards for composite wood products, extending all of the TSCA Title VI compliance deadlines to account for the delays to the originally published effective date. The rule was published in the Federal Register May 24. The new compliance dates are as follows:
• Emissions, recordkeeping and labeling provisions – March 22, 2018
• Import certification – March 22, 2019
• Laminated products – March 22, 2024
The rule also proposes to extend the transitional period for CARB-certified third-party certifiers (TPCs) to March 22, 2019.
This proposed rule will enter into effect within 45 days of publication in the Federal Register if EPA does not receive any adverse comment within 15 days.
“The federal regulation that definitively addresses formaldehyde emissions from composite wood products sold in the United States was first published in the Federal Register on Dec. 12, 2016, by the U.S. Environmental Protection Agency. If properly enforced, the regulation can ensure that all products – both domestic and imported composite wood panels and the finished products containing them – meet the world’s most stringent standards for formaldehyde emissions. It also marks the culmination of over 30 years of product stewardship by the composite wood industry, which through voluntary efforts and consistent and progressive work with regulators, has successfully developed products that consistently meet or exceed these tough standards,” said Jackson Morrill, president of the Composite Panel Association.
From Woodworking Network: https://www.woodworkingnetwork.com/news/woodworking-industry-news/epas-final-rule-extends-formaldehyde-compliance-dates?ss=news,news,woodworking_industry_news,news,almanac_market_data,news,canadian_news
