by Web Editor | Aug 24, 2018 | News
First Mass Plywood Panel Gets APA Certification
googletag.cmd.push(function() { googletag.display('div-gpt-ad-1548376180744-0'); });
Freres Lumber Company says it has achieved Mass Plywood Panels (MPP) certification under the
APA – The Engineered Wood Association’s ANSI/APA PRG 320 standard.
The product is the first Mass Timber Panel constructed entirely out of Structural Composite Lumber (SCL) worldwide, making it much more cost effective than CLT (cross-laminated timber) options, according to a Freres news release. Mass Timber Panels will allow rapid construction of multi-story structures with pre-fabricated structural wood panels, the release says.
The predictable char rate of mass timber panels allows buildings to be built taller with wood, allowing multi-story structures out of wood up to 18 stories anticipated in the next iteration of the International Building Code (IBC). Wood structures carry a smaller carbon footprint, provide greater sustainability, faster construction with less waste and are an economically favorable construction method compared to concrete and steel, Freres says.
The company says it is continuing to refine the design values of the product line, and will roll out additional MPP product configurations.
From Building Design + Construction: bdcnetwork.com
RELATED ARTICLES
PANEL WORLD SEPTEMBER 2020
FRERES HAS TAIHEI HORIZONTAL PRESS GOING
googletag.cmd.push(function() { googletag.display('div-gpt-ad-1548375988914-0'); });
googletag.cmd.push(function() { googletag.display('div-gpt-ad-1589916740199-0'); });
googletag.cmd.push(function() { googletag.display('div-gpt-ad-1548376916922-0'); });
googletag.cmd.push(function() { googletag.display('div-gpt-ad-1548376961890-0'); });
googletag.cmd.push(function() { googletag.display('div-gpt-ad-1548377005333-0'); });
The monthly Panel World Industry Newsletter reaches over 3,000 who represent primary panel production operations.
Panel World is delivered six times per year to North American and international professionals, who represent primary panel production operations. Subscriptions are FREE to qualified individuals.
Complete the online form so we can direct you to the appropriate Sales Representative. Contact us today!
by Web Editor | Aug 22, 2018 | News
Wood Construction Pushes Forward On Both Sides Of The Border
googletag.cmd.push(function() { googletag.display('div-gpt-ad-1548376180744-0'); });
Mass timber construction is making waves on both sides of the Canada-U.S. border, but factors in each country mean a different pace of progress.
The state of Washington is rapidly moving forward on both green construction and use of advanced wood products, but Washington State Department of Commerce forest products sector lead Brian Hatfield said the state isn’t necessarily ahead of its Canadian neighbor. “In some ways, British Columbia is ahead of us in terms of low carbon building materials,” he said.
In 2017, the Washington State Department of Enterprise Services oversaw a pilot project that built 20 kindergarten through Grade 3 classrooms using cross-laminated timber (CLT) in five school district sites in Washington. “We had a pilot district for five school districts, all single-story schools, and those have gone pretty well. They went up quickly and everyone was impressed,” Hatfield said.
The state’s 2016 supplemental capital budget included $5.5 million for the pilot project, which also measures the efficiencies of using engineered wood products through the construction process.
While Washington is taking steps to increase wood use in construction, the Province of British Columbia has pushed for mass timber and wood-focused design for the previous decade. In 2009, the Province of British Columbia put the Wood First Act into practice, which requires provincially funded projects to use wood as a primary construction material. The B.C. building code was also modified in 2009 to allow for wood buildings of up to six stories.
From Journal Of Commerce: canada.constructconnect.com.
googletag.cmd.push(function() { googletag.display('div-gpt-ad-1548375988914-0'); });
googletag.cmd.push(function() { googletag.display('div-gpt-ad-1589916740199-0'); });
googletag.cmd.push(function() { googletag.display('div-gpt-ad-1548376916922-0'); });
googletag.cmd.push(function() { googletag.display('div-gpt-ad-1548376961890-0'); });
googletag.cmd.push(function() { googletag.display('div-gpt-ad-1548377005333-0'); });
The monthly Panel World Industry Newsletter reaches over 3,000 who represent primary panel production operations.
Panel World is delivered six times per year to North American and international professionals, who represent primary panel production operations. Subscriptions are FREE to qualified individuals.
Complete the online form so we can direct you to the appropriate Sales Representative. Contact us today!
by Web Editor | Jun 25, 2018 | News
The U.S. Environmental Protection Agency’s (EPA) new federal formaldehyde emissions regulations took effect on June 1st, 2018. As of this date all composite wood products must be certified as compliant with these regulations.The EPA defines composite wood products here as both domestic and imported particleboard, medium density fiberboard (MDF), and hardwood (decorative) plywood.
Structural engineered wood products made for construction applications are exempt from this regulation, including structural plywood, oriented strand board (OSB), wood I-joists, laminated veneer lumber, and glued-laminated timber. All of these products are manufactured with low-emitting, moisture-resistant adhesives in accordance with existing product standards and building codes, according to The Engineered Wood Association (APA).
For quick reference, structural engineered wood products marked with the APA Mark of Quality are considered exempt from the new regulations. If unmarked products from APA member mills are sold into applications that do not require a certification mark, the product invoice and an APA certificate of conformance can be used to identify the product as exempt.
The Formaldehyde Standards for Composite Wood Products Act was signed by President Barack Obama on July 7th, 2010, based on the Air Toxic Control Measure developed by the California Air Resources Board (CARB). The first phase of regulation rollout, now in effect, allows for compliance with either the CARB ATCM Phase II or the U.S. EPA TSCA Title VI. Starting March 22nd, 2019, only the U.S. EPA TSCA Title VI will be permitted as a path to compliance.
From Builder: https://www.builderonline.com/building/regulation-policy/structural-engineered-wood-products-exempt-from-new-epa-formaldehyde-regulations_o
by Web Editor | May 24, 2018 | News
Oregon’s U.S. Senators Jeff Merkley and Ron Wyden recently submitted a bipartisan letter urging the Committee on Agriculture, Nutrition and Forestry to include the Timber Innovation Act, which supports the development of mass timber products for building construction, in the next Farm Bill.
“We have been working to establish Oregon as a hub for mass timber products, using local timber and bolstering our forest products economy,” Merkley said. “This bill supports innovative manufacturing that creates jobs in the rural part of the state and encourages more sustainable tall wood building construction in urban parts of the state.”
“Oregon is leading the way in producing and engineering cross-laminated timber, which is revolutionizing the way our country constructs buildings,” Wyden said. “The Timber Innovation Act promotes job growth in Oregon’s timber counties and encourages the kind of Oregon entrepreneurship that can catapult our state’s economy to new heights.”
Merkley is co-leading the letter with Sen. Mike Crapo (R-ID); cosigners include Sens. Wyden, James Risch (R-ID), Amy Klobuchar (D-MN), Steven Daines (R-MT), Roger Wicker (R-MS), Gary Peters (D-MI), Angus King (I-ME) and Maria Cantwell (D-WA).
Oregon has been at the forefront of developing mass timber products, including includes cross-laminated timber (CLT), nail laminated timber, glue laminated timber, laminated strand lumber, and laminated veneer lumber. However, U.S. building codes do not currently recognize mass timber products as official construction materials, leaving the products without a standard rating system for quality, fire resistance, earthquake resistance, and more.
Read more on this from the Klamath Falls News at https://www.klamathfallsnews.org/news/merkley-wyden-urge-bipartisan-timber-innovation-act-to-be-included-in-farm-bill.
by Web Editor | May 10, 2018 | News
Boise Cascade Co., Boise, Id., has agreed to purchase Norman Distribution, Inc., a distributor of engineered wood, commodity lumber, and specialty building materials based in Medford, Ore.
“Norman Distribution has built an excellent reputation as a strong industry partner throughout its four decades in this business,” said Nick Stokes, executive VP of building materials distribution. “The positive relationships they have built with their customers and suppliers have been a key to their success. We are very pleased to welcome their team to Boise Cascade and strengthen our presence in the Oregon, Northern California, and Nevada markets.”
The entire staff is expected to remain, under the banner Boise Cascade Building Materials Distribution Medford Branch.
“Norman Distribution is excited and proud to join Boise Cascade,” said owner Jeff Norman. “We were one of the first customers of their EWP mill in White City, Ore., which began operating in 1991. This is a great strategic and cultural fit, which will allow us to grow our product line and better serve our customers.”
The acquisition is expected to be complete in the coming weeks.
From Building Products Digest: https://www.building-products.com/article/boise-cascade-buys-norman/
