by Web Editor | Sep 6, 2017 | News
Norbord is buying up wood burned by the Gustafsen wildfire. A local logging contractor, Rod Dillman, is the first to begin harvesting in the Gustafsen fire area, says Mike Kennedy, Woodlands Manager with Norbord in an email. He adds that there are some unique challenges logging burned wood.
“According to Rod, a primary challenge in logging the burned wood is the increased maintenance needed on his machines. There is a lot of ash dust which, even more than ‘normal’ dirt, tends to stick to surfaces and must be washed off rather than just wiped. It also makes it necessary to change air filters more frequently. Finally, carbon in the ash is hard on the knives used in the harvesting equipment. Rod also states that they are learning as they go, as this is the first time he has operated in such a large area of scorched timber.”
Kennedy says that luckily there are a few things that have moderated the effect of the fires on the trees, meaning most of the wood is still intact underneath the bark. “Certain species, for example, Douglas-fir with its thick bark, have evolved to withstand the effects of fire, which is a common natural event in the areas where it grows. Fire intensity was not uniform across the landscape, so in many places, trees were scorched on the bark only with minimal damage to the underlying wood. Entire trees are not necessarily affected, with more damage occurring in the bottom portion. It is often possible to buck this out with log processors at the roadside. Processing pressure can be increased to remove most of the severely burned bark or wood.”
They take pride in their adaptability to make the most of the fiber available and are very experienced using dry pine beetle killed wood, he says. “Norbord maintains the highest quality standards for our products and these standards are ensured through third-party certification by APA – The Engineered Wood Association. We have been able to use burned wood in the past.”
From 100 Mile Free Press: https://www.100milefreepress.net/news/norbord-starts-logging-burned-wood/
by Web Editor | Jun 13, 2017 | News
Timber construction is opening a new market that has been keeping lumber and milling machinery busy at a growing number of wood products companies, including Montreal’s Nordic Structures, Sauter Timber in Rockwood, Tennessee, SmartLam, in Columbia Falls, Montana, and D.R. Johnson, in Portland, Oregon.
Oregon-based D.R. Johnson Wood Innovations, a subsidiary of D.R. Johnson, specializes in the manufacture of cross-laminated timber, or CLT, and glue-laminated beams from Douglas fir and Alaskan yellow cedar. D.R. Johnson Wood was the first U.S. company to receive APA/ANSI certification to manufacture structural CLT panels – and CEO Valerie Johnson plans to help grow the U.S. market.
D.R. Johnson has received the first U.S. certification to manufacture cross-laminated timbers (CLT) under a new standard approved last year by the American National Standards Institute. D.R. Johnson is one of only three North American companies certified by the Engineered Wood Association to construct CLT for use in buildings.
Johnson’s company employs 125 at a traditional sawmill and laminating plant, which was recently expanded by 13,000 square feet for increased CLT production. They’re currently fielding calls from hopeful builders, and manufacturing samples to be tested for fire safety and structural quality. One recent new wood construction project is a 14-story wooden apartment tower being built in Portland, Oregon.
From Woodworking Network: https://www.woodworkingnetwork.com/wood/pricing-supply/timber-construction-has-lumber-milling-machinery-rolling
by Web Editor | May 24, 2017 | News
One building stands out in the old logging town of Prince George, Canada. Encased in a sleek glass facade, the structure towers above most of its neighbors, beckoning from afar with the warm amber glow of Douglas fir. Constructed almost entirely from timber in 2014, the 8-story, 30-meter building is among the tallest modern wooden structures in the world. But it is more than an architectural marvel. As the home of the Wood Innovation and Design Centre at the University of Northern British Columbia (UNBC), it is also an incubator for wooden buildings of the future — and a herald for a movement that could help to tackle global warming.
The building is less like a log cabin and more like a layered cake, constructed from wooden planks glued and pressed together, precision cut by factory lasers and then assembled on site. All told, the university avoided the release of more than 400 tons of carbon dioxide by eschewing energy-intensive concrete and steel, and the building locks up a further 1,100 tons of CO2 that was harvested from the atmosphere by British Columbian trees. In total, that’s enough to offset the emissions from 160 households for a year.
Wooden construction has ancient roots, but only in the past two decades have scientists, engineers and architects begun to recognize its potential to stave off global warming. By substituting concrete and steel with wood from sustainably managed forests, the building industry could curb up to 31% of global carbon emissions, according to research by Chad Oliver, a forest ecologist at Yale University in New Haven, Connecticut. In time, such a shift could help humanity to pull CO2 out of the atmosphere, potentially reversing the course of climate change.
“It’s the plywood miracle,” says Christopher Schwalm, an ecologist at Woods Hole Research Center in Falmouth, Massachusetts. “This is something that could have a significant impact on the riddle that is global environmental change.”
From Nature.com: https://www.nature.com/news/the-wooden-skyscrapers-that-could-help-to-cool-the-planet-1.21992
by Web Editor | Oct 7, 2016 | News
If the vast potential of timber construction isn’t obvious, a new exhibit at Washington D.C.’s National Building Museum aims to clear things up. Running through May 2017, the USDA-sponsored Timber City is drawing attention to the recent boom in a worldwide movement toward timber construction.
It’s opening up a new market that has been turning the mills at a growing number of wood products companies, including Montreal’s Nordic Structures, Sauter Timber in Rockwood, Tennessee, and D.R. Johnson.
Oregon-based D.R. Johnson Wood Innovations, a subsidiary of D.R. Johnson, specializes in the manufacture of cross-laminated timber (CLT) and glue-laminated beams from Douglas fir and Alaskan yellow cedar. They’re the first U.S. company to receive APA/ANSI certification to manufacture structural CLT panels – and they hope to help grow the U.S. market.
D.R. Johnson is one of only three North American companies certified by the Engineered Wood Association to construct CLT for use in buildings. The company employs 125 at a traditional sawmill and laminating plant, which was recently expanded by 13,000 square feet for increased CLT production. They’re currently fielding calls from hopeful builders, and manufacturing samples to be tested for fire safety and structural quality.
D.R. Johnson says the system for constructing CLT involves assembling prefabricated parts, speeding construction, and paring labor costs. The company partnered with wood processor manufacturer USNR to build a custom panel press for CLT.
From Woodworking Network: https://www.woodworkingnetwork.com/events-contests/event-coverage/timber-construction-exhibition-shines-light-industry
by Web Editor | Mar 7, 2016 | News
DR Johnson Lumber Co., based in the small Oregon town of Riddle, is poised at the forefront of what could be a revolutionary use of wood as a building material in the Northwest.
Don R. Johnson founded the mill in 1951. Following his death in 2010, his daughters Valerie Johnson and Jodi Westbrooks decided they needed to move the millworks company in a new direction. Their father had been quick to jump on laminated beam products early on and the millworks had manufactured them for decades. Following the lead of their father’s eye for innovation, Valerie and Jodi decided to expand the mill’s manufacturing through a division called Riddle Laminators to include a new product they had heard about.
They have since invested millions of dollars in machinery that is allowing DR Johnson to become the first manufacturer in the country certified to produce cross-laminated timber panels – a new take on existing technology and products in the wood construction industry. What makes their product so progressive is the use of new-growth softwoods like Douglas fir to produce lighter, stronger, more flexible panels in sizes able to make the construction process much more efficient. They also offer a replacement to typical steel or concrete framing.
“We’re limited to 10-foot-by-32-foot panels because of transportation issues, but we can go larger if we need to,” said Todd Black, DR Johnson sales manager. “We have computer-controlled router systems that can pre-cut door and window openings, so the panels come prefabricated, labeled (for point of installation) and ready for immediate installation. Because they’re stronger and lighter than steel or concrete, we’re not limited to three or four stories as wood-frame construction would be.”
CLT is starting to capture attention in Portland. A 12-story structure under construction in the Pearl District will be the tallest all-wood building in the U.S. The technology has already been used successfully in Europe, where buildings up to 22 stories have been constructed with the same type of panels.
From DJC Oregon: https://djcoregon.com/news/2016/03/03/newsmakers-2016-dr-johnson-lumber-company/
