by Web Editor | Nov 1, 2017 | News
The Environmental Protection Agency (EPA) published a direct final rule October 25 to update a few voluntary consensus standards in the rule governing formaldehyde emission standards for composite wood products.
The direct final rule corrects the rule at 40 CFR 770.20(b) by allowing the formaldehyde emissions mill quality control test methods to correlate to either the ASTM E1333-14 test method, or if shown to be equivalent, the ASTM D6007-14 test method. This correlation was inadvertently omitted from the original final rule, EPA wrote.
The correction aligns the mill quality control testing requirements with the California Air Resources Board standards allowing mill quality control tests to be correlated to the less expensive ASTM D6007-14 test method.
These updates apply to emission testing methods and regulated composite wood product construction characteristics. The voluntary consensus standards were updated, withdrawn or superseded to because of new information, technology, and methodology, EPA wrote.
EPA’s final rule takes effect December 11, unless EPA receives adverse comments on it by November 9.
From Woodworking Network: https://www.woodworkingnetwork.com/wood/panel-supply/epa-publishes-final-rule-fixes-place-formaldehyde-standards?ss=news,news,woodworking_industry_news,news,almanac_market_data,news,canadian_news
by Web Editor | Sep 8, 2017 | News
The U.S. Environmental Protection Agency will issue a final rule that will extend compliance dates for the national Formaldehyde Emission Standards for Composite Wood Products, according to Furniture Today.
“As announced on its website this week, the dates will be amended as follows:
* Emission standards, recordkeeping and labeling provisions from December 12, 2017, to December 12, 2018
* Import certification provisions from December 12, 2018, to March 22, 2019
* Laminated product producer provisions from December 12, 2023, to March 22, 2024
* The conclusion of the transition period for CARB Third-Party Certifiers from December 12, 2018, to March 22, 2019
“On July 11, the EPA also published a direct final rule that would remove a provision that prohibited the early labeling of compliant products before the original December 12 deadline. As it received no adverse comments on this matter, the rule has been changed to allow companies to label compliant products before the new December 2018 deadline. That change became effective August 25, meaning that companies can begin labeling product manufactured by this date.
“The EPA said it has received no negative comments on these changes, which are being finalized as proposed.”
From Floor Daily: https://www.floordaily.net/flooring-news/epa-extends-compliance-dates-for-composite-wood-products
by Web Editor | May 26, 2017 | News
EPA issued a proposed Direct Final Rule, concerning formaldehyde emission standards for composite wood products, extending all of the TSCA Title VI compliance deadlines to account for the delays to the originally published effective date. The rule was published in the Federal Register May 24. The new compliance dates are as follows:
• Emissions, recordkeeping and labeling provisions – March 22, 2018
• Import certification – March 22, 2019
• Laminated products – March 22, 2024
The rule also proposes to extend the transitional period for CARB-certified third-party certifiers (TPCs) to March 22, 2019.
This proposed rule will enter into effect within 45 days of publication in the Federal Register if EPA does not receive any adverse comment within 15 days.
“The federal regulation that definitively addresses formaldehyde emissions from composite wood products sold in the United States was first published in the Federal Register on Dec. 12, 2016, by the U.S. Environmental Protection Agency. If properly enforced, the regulation can ensure that all products – both domestic and imported composite wood panels and the finished products containing them – meet the world’s most stringent standards for formaldehyde emissions. It also marks the culmination of over 30 years of product stewardship by the composite wood industry, which through voluntary efforts and consistent and progressive work with regulators, has successfully developed products that consistently meet or exceed these tough standards,” said Jackson Morrill, president of the Composite Panel Association.
From Woodworking Network: https://www.woodworkingnetwork.com/news/woodworking-industry-news/epas-final-rule-extends-formaldehyde-compliance-dates?ss=news,news,woodworking_industry_news,news,almanac_market_data,news,canadian_news
by Web Editor | Nov 4, 2016 | News
The US Environmental Protection Agency (EPA) has finalized the new rules on formaldehyde emissions for manmade wood products. Under the new regulations, Third Party Certification (TPC) bodies currently approved to provide certification for the California Air Resources Board (CARB) formaldehyde standards will be entitled to provide certification for the new Toxic Substances Control Act (TSCA) formaldehyde emissions standard. Permission will be granted for a period of two years without the requirement for further approval. After this period, TPC will require accreditation by the EPA for TSCA Title VI certification.
The grace period will make it easier for manufacturers seeking a certified TPC and benefits continuity as the new set of rules, entitled 40 CFR 770, are based on CARB standards. The Formaldehyde Standards for Composite Wood Products Act, signed by President Obama in July 2010 amended the TSCA with the addition of Title VI and required the EPA to create regulations on formaldehyde in manmade wood products. After a lengthy period of consultation, new rules have been announced, which will come into effect one year after publication in the Federal Register.
Regulations 40 CFR 770 stipulate requirements for product labeling, compliance documentation, and for the conditions for approval of TPC and Accreditation Bodies (AB). The regulations also set out the requirements for formaldehyde emissions from composite wood products, component parts and finished goods.
Composite wood producers need to be certified through a program that includes product testing for emission standards and production facility inspections, including requirements for processes and record keeping. The emission standards are based on test method ASTM E1333-10.
From OpenPR: https://www.openpr.com/news/377699/CARB-Approved-TPC-Bodies-Can-Provide-Certification-on-New-US-Formaldehyde-Emissions-Standards.html
by Web Editor | Oct 28, 2016 | News
The EPA, expected to issue soon a final rule to implement the Formaldehyde Standards for Composite Wood Products Act, which added Title VI to the Toxic Substances Control Act.
It’s latest comment period is still open until November 7:
The EPA reviewed its emission inventory and compliance databases to determine if its current information was sufficient to conduct an RTR for the PCWP NESHAP and develop emission limits for the remanded PCWP process units. The available data for the affected population of plywood, composite wood products, and lumber dry kilns was found to be insufficient to adequately review and evaluate the emission standards for these source categories. The ICR will provide specific, required information, including emission inventories, compliance demonstrations, process changes, and information about control technologies/practices adopted since the application of maximum achievable control technology (MACT). Table 1 contains the North American Industry Classification System (NAICS) codes of facilities impacted by this information collection. Only major sources and synthetic area sources for these NESHAP categories will be affected by this information collection.
There will be a survey phase, Phase I, and a contingent testing phase, Phase Start Printed Page 62126II, in this information collection. Phase I seeks to collect facility-level information (e.g., facility name, location, contact information, and process unit details), emissions information, compliance data, control information, and descriptions of technological innovations. Phase I will be sent to all known operators of PCWP facilities that are major sources for hazardous air pollutants (HAP) regulated by these standards and synthetic area sources which used technology to avoid major PCWP NESHAP source status. Phase I responses may contain CBI. The survey will be provided and collected in an electronic format. The submission requires the owner or operator to certify that the information being provided is accurate and complete.
Read more at Woodworking Network: https://www.woodworkingnetwork.com/management/epa-hardwood-plywood-formaldehyde-rule-goes-live-federal-register-october-27-2016
