by Web Editor | Apr 6, 2018 | News
If you manufacture finished goods that contain particleboard, medium density fiberboard (MDF) or hardwood plywood (HWPW), then you likely have been preparing to comply with the Environmental Protection Agency’s (EPA’s) Formaldehyde Emissions Standards for Composite Wood Products rule. If this is the first time you have heard of this Regulation, known also as “TSCA Title VI” after the statutory authority for the regulation, there is still time to prepare for compliance, but time is of the essence. This article provides a general outline of the TSCA Title VI requirements applicable to manufacturers of finished products containing composite wood panels, as well as the key dates for compliance, which have only just been finalized through recent litigation.
TSCA Title VI covers all finished goods and component parts made with particleboard, MDF and HWPW. Fabricators that make component parts using a wood or woody grass veneer (such as bamboo) attached to a composite wood core that is later used in a finished product may also meet the definition for “laminated product” producers, which triggers several additional requirements starting March 22, 2024. TSCA Title VI does include a “de minimis” exemption for finished goods or component parts sold directly to end users if its composite wood content does not exceed 144 square inches on its largest face. This exemption applies only to labeling; products such as small picture frames and others that meet the de minimis definition must still be made with compliant composite wood and comply with recordkeeping requirements.
The central requirement for manufacturers of finished goods is that they use compliant composite wood and that this is documented throughout the supply chain. On March 13, 2018, the U.S. District Court for the Northern District of California issued an order altering many TSCA Title VI compliance dates, including those related to sourcing. Fabricators must either begin using TSCA Title VI certified composite wood panels in all component parts and finished goods by June 1, 2018, or be able to prove that the composite wood panels or component parts were manufactured before, or were in inventory prior to, that date. The Court has now also allowed California Air Resources Board Airborne Toxic Control Measure Phase 2 (“CARB 2”) certified composite wood panels to be considered TSCA Title VI compliant until March 22, 2019.
Read more on this from Woodworking Network at https://www.woodworkingnetwork.com/management/quickguide-to-epa-formaldehyde-regulation-what-woodworkers-need-know?ss=news,news,woodworking_industry_news,news,almanac_market_data,news,canadian_news.
by Web Editor | Nov 6, 2017 | News
The Kitchen Cabinet Makers Association (KCMA) may come to the defense of the Environmental Protection Agency (EPA) after various non-profit organizations throughout Louisiana announced they would sue the EPA for stalling its formaldehyde rule enforcement.
Through the lawsuit, Louisiana-based NGOs Sierra Club and Earthjustice are demanding the EPA be prevented from extending compliance with new regulation. Both groups survived Hurricane Katrina, in which FEMA deployed trailers containing formaldehyde-treated wood products to assist displaced victims.
“It is outrageous that people recovering from this year’s hurricanes might have to deal with the same health issues in their emergency housing that the EPA has known about — and was supposed to address — years ago,” attorney Patti Goldman said in a statement. Earthjustice published a story about their decision to sue on its website.
“Though the story is wrought with errors with respect to the alleged adverse health effects from formaldehyde exposure, the fact remains that a lawsuit has been filed that could impact the earlier granted extensions of the compliance dates to December 12, 2018,” said the KCMA in its newsletter. “KCMA is exploring our options and potential involvement in the suit; we will provide more details in the coming days. KCMA is also reaching out this week to related D.C. trade associations and will work with them to ensure a coordinated effort on this important issue.”
From Woodworking Network: https://www.woodworkingnetwork.com/news/woodworking-industry-news/kcma-could-defend-epa-formaldehyde-lawsuit?ss=news,news,woodworking_industry_news,news,almanac_market_data,news,canadian_news
by Web Editor | Sep 8, 2017 | News
The U.S. Environmental Protection Agency will issue a final rule that will extend compliance dates for the national Formaldehyde Emission Standards for Composite Wood Products, according to Furniture Today.
“As announced on its website this week, the dates will be amended as follows:
* Emission standards, recordkeeping and labeling provisions from December 12, 2017, to December 12, 2018
* Import certification provisions from December 12, 2018, to March 22, 2019
* Laminated product producer provisions from December 12, 2023, to March 22, 2024
* The conclusion of the transition period for CARB Third-Party Certifiers from December 12, 2018, to March 22, 2019
“On July 11, the EPA also published a direct final rule that would remove a provision that prohibited the early labeling of compliant products before the original December 12 deadline. As it received no adverse comments on this matter, the rule has been changed to allow companies to label compliant products before the new December 2018 deadline. That change became effective August 25, meaning that companies can begin labeling product manufactured by this date.
“The EPA said it has received no negative comments on these changes, which are being finalized as proposed.”
From Floor Daily: https://www.floordaily.net/flooring-news/epa-extends-compliance-dates-for-composite-wood-products
by Web Editor | Jul 7, 2017 | News
After receiving negative feedback from the industry, the Environmental Protection Agency (EPA) withdrew its Direct Final Rule Wednesday, removing delayed compliance dates for certain formaldehyde emissions standards on wood products.
“Since the direct final rule and proposed rule’s publication, EPA has received several comments on the proposed amendments to the compliance dates that the agency considers to be adverse,” the agency said.
Published in May, the Direct Final Rule gave the composite wood industry more time to comply with certain standards, including extending the deadline to meet emissions standards, record keeping provisions and labeling rules:
• Emissions, recordkeeping and labeling provisions – March 22, 2018
• Import certification – March 22, 2019
• Laminated products – March 22, 2024
The rule also proposes to extend the transitional period for CARB-certified third-party certifiers (TPCs) to March 22, 2019.
The EPA will instead proceed with a final rule based on its proposed rule published on May 24 after considering all public comments.
From Woodworking Network: https://www.woodworkingnetwork.com/news/woodworking-industry-news/epa-withdraws-final-rule-delay-formaldehyde?ss=news,news,woodworking_industry_news,news,almanac_market_data,news,canadian_news
by Web Editor | May 26, 2017 | News
EPA issued a proposed Direct Final Rule, concerning formaldehyde emission standards for composite wood products, extending all of the TSCA Title VI compliance deadlines to account for the delays to the originally published effective date. The rule was published in the Federal Register May 24. The new compliance dates are as follows:
• Emissions, recordkeeping and labeling provisions – March 22, 2018
• Import certification – March 22, 2019
• Laminated products – March 22, 2024
The rule also proposes to extend the transitional period for CARB-certified third-party certifiers (TPCs) to March 22, 2019.
This proposed rule will enter into effect within 45 days of publication in the Federal Register if EPA does not receive any adverse comment within 15 days.
“The federal regulation that definitively addresses formaldehyde emissions from composite wood products sold in the United States was first published in the Federal Register on Dec. 12, 2016, by the U.S. Environmental Protection Agency. If properly enforced, the regulation can ensure that all products – both domestic and imported composite wood panels and the finished products containing them – meet the world’s most stringent standards for formaldehyde emissions. It also marks the culmination of over 30 years of product stewardship by the composite wood industry, which through voluntary efforts and consistent and progressive work with regulators, has successfully developed products that consistently meet or exceed these tough standards,” said Jackson Morrill, president of the Composite Panel Association.
From Woodworking Network: https://www.woodworkingnetwork.com/news/woodworking-industry-news/epas-final-rule-extends-formaldehyde-compliance-dates?ss=news,news,woodworking_industry_news,news,almanac_market_data,news,canadian_news
