No One Injured In Plum Creek MDF Plant Explosion

No One Injured In Plum Creek MDF Plant Explosion

 

The Plum Creek medium density fiberboard (MDF) plant in Columbia Falls experienced an explosion and fire, but no one was injured in the blaze.

The fire appeared to have been contained to one line of the plant, said Columbia Falls firefighter Karl Weeks. The call for the fire came out at 6:09 a.m. and firefighters were off the scene at 11:15 a.m. Weeks said there were multiple spot fires as a result of the explosion inside the massive plant. The facility underwent a multi-million dollar renovation after a fire and explosion damaged the building in June of last year.

The cause of this fire remains under investigation. Whitefish responded with mutual aid and about 15 firefighters total fought the blaze, Weeks said.

Plum Creek spokeswoman Kathy Budinick said the fire apparently originated in an area of line one that holds the fiber before it enters the line. “The fire suppression system worked as intended,” she said.

The plant has two lines and line two is up and running, Budinick said. Line one will remain down until repairs can be made, but Budinick said there was minimal damage to the plant itself. She said the fire suppression system also needs to be recharged.

From Hungry Horse News (2015)

 

Latest News

Spearhead Announces New Glulam Plant

Spearhead Announces New Glulam PlantSpearhead, a Nelson, BC-based family-owned timber fabricator, is investing $60 million in a new production...

Ashlee Cribb To Lead Gorman Group

Ashlee Cribb To Lead Gorman GroupFollowing the announcement from current CEO Nick Arkle of his intent to retire more than a year ago, the Board and...

Find Us On Social

Newsletter

The monthly Panel World Industry Newsletter reaches over 3,000 who represent primary panel production operations.

Subscribe/Renew

Panel World is delivered six times per year to North American and international professionals, who represent primary panel production operations. Subscriptions are FREE to qualified individuals.

Advertise

Complete the online form so we can direct you to the appropriate Sales Representative. Contact us today!

Montana Senator Helps Secure $250,000 For SmartLam

U.S. Sen. Jon Tester, D-Mont., helped secure a $250,000 grant from the U.S. Department of Agriculture for SmartLam, a cross-laminated timber manufacturer and distributor in Columbia Falls.

In January, Tester wrote a letter of support for SmartLam’s Wood Innovations Planning Grant application. The grant was announced last week.

“The folks at SmartLam are producing a unique product, and these additional resources will help them continue to grow and hire folks in the Flathead Valley,” Tester said in a news release. “Successful operations like SmartLam continue to show the country the high quality businesses here in Montana.”

SmartLam is the first manufacturer and distributor of cross-laminated timber products in the United States. When its expansion is complete, it will be the largest cross-laminated timber manufacturer in the world.

Wood Innovations Grants are awarded to companies that use wood products as a renewable energy source and as a building material. The money is designed to increase the use of wildfire fuel from public lands to promote forest health and create jobs.

From the Daily Inter Lake: https://www.dailyinterlake.com/members/tester-helps-secure-for-smartlam/article_ffe490e2-e2f2-11e4-b4b7-a774ff6ea976.html

Plum Creek To Invest $10 Million In Montana Plants

A gradual increase in housing starts across the U.S. and better timber prices are two factors behind Plum Creek Timber Co.’s decision to invest $10 million in plant improvements at its Northwest Montana manufacturing plants.

“We’re optimistic overall for another good year,” said Tom Ray, Plum Creek’s vice president of northwest resources and manufacturing. “The largest single concern is the lack of raw materials, but we’re hoping Congress will address that.”

One of the largest landowners in the U.S., Plum Creek had a strong year in 2014, reporting earnings of $214 million on $1.48 billion in revenues. Harvest numbers were 13 percent over 2013. But timber resources in Northwest Montana can be a concern. Last year, Plum Creek cut back hours for workers at the Columbia Falls sawmill from 40 hours per week to 36 after a federal court ruling blocked several timber sales on state forest land. “We had a decline there, but once we get past breakup and into early summer, we’re hopeful to go back to a regular schedule,” Ray said.

Plum Creek plans to invest $6 million at its medium-density fiberboard plant in Columbia Falls. The No. 1 line, which was built in 1974 and manufactures panels up to 1 1/4 inches thick, will see $1.6 million for improvements to reliability and efficiency. Another $300,000 will be spent on computer equipment and monitoring cameras.

The company also plans to spend $2 million on the MDF plant’s No. 2 line, which was built in 2001 at a cost of $80 million and produces thin panels one-tenth of an inch thick. The furniture industry is a major customer, but other businesses now use MDF products.

From Hungry Horse News: https://www.flatheadnewsgroup.com/hungryhorsenews/plum-creek-to-invest-mil-in-local-plants/article_e8e443a2-d883-11e4-ad41-cfbdb6471aba.html

Montana Mill To Be Largest CLT Plant In The World

When completed, a new wood products plant at the Columbia Falls Industrial Park north of town will be the largest cross-laminated timber (CLT) plant in the world, Sen. Jon Tester learned during a meeting with city officials and business leaders at Freedom Bank on March 20.

SmartLam general manager Casey Malmquist said he’s in talks with the industrial park’s new Canadian owners about plans for construction of a new manufacturing plant to produce the giant wood panels. “We plan to quadruple our capacity, which will make us the largest CLT plant in the world,” Malmquist told Tester.

SmartLam’s panels are made with low-grade dimensional lumber from F.H. Stoltze Land & Lumber Co. that are sawn into smaller pieces and finger-jointed and planed into a 2-inch product that is then cross-laminated into large, heavy and very strong panels.

Currently the panels are being used in the oil industry for drilling rig platforms, bridges and roadways, but SmartLam wants to start producing panels for building construction, which is common in Europe.

Malmquist enumerated the environmental benefits of replacing concrete and steel with renewable and sustainable wood products.

From Hungry Horse News: https://www.flatheadnewsgroup.com/hungryhorsenews/expansion-will-make-smartlam-no-in-the-world/article_03c59e1c-d48a-11e4-90b8-fb43c4b37825.html