by Web Editor | Nov 15, 2018 | News
Dying, deformed and diseased trees will be key ingredients of particleboard manufactured at the new Arauco panel mill in northern Michigan.
“All of these degraded trees need to be removed to better manage our forests,” said Scott Robbins, director of the Michigan Sustainable Forestry Initiative implementation and forest policy for the Michigan Forest Products Council (MFPC). “The Arauco mill is going to source these types of trees to make their product. It’s always good to get rid of the bad trees so you can grow more good trees.”
Randy Keen, wood procurement manager for the Grayling mill, said the current plan is to use 60 percent roundwood and 40 percent clean sawmill chips and other lumber processing byproducts.
“There are not enough sawmills in this area to run a mill this size so that’s why we have to use a combination of pulpwood and mill residuals,” he said. “The main species used will be pine, fir and spruce softwoods, but mixed hardwood species, mainly maple and beech, will be used as well. In the case of pulpwood, we’ll be using the very top of the tree that typically gets left in the woods after the log material is removed. These are small diameter logs that are not suitable for anything else.”
“We believe in the highest and best use of the tree,” Keen said. “If there is a saw log in the tree, we want it to go to a sawmill. By using the stuff that is crooked or has a little bit of rot in it to make our particleboard, we help use the whole tree and help clean the forest for the next generation of trees.”
Read more on this from Woodworking Network at https://www.woodworkingnetwork.com/news/woodworking-industry-news/new-arauco-michigan-mill-convert-low-grade-wood-quality-particleboard/
by Web Editor | Apr 14, 2017 | News
Arauco North America has broken ground on its $400 million particleboard plant. The new operation will employ more than 250 and will make both raw particleboard and TFM. The Grayling particleboard plant is reported to be one of the largest mills of its kind. When completed the new location will feature North America’s largest continuous particleboard press.
Kelly Shotbolt, president of Arauco North America, said the upper Midwest is the largest consuming region of particleboard in all of North America. Shotbolt and Rick Snyder, governor of Michigan, spoke at the groundbreaking event. The plant is expected to be completed in late 2018.
The Arauco Grayling plant will create approximately 700 construction jobs and about 250 permanent jobs. Once complete, the plant will measure 820,000 square feet with an annual capacity of 800,000 square meters or 452 million square feet of particleboard, along with full lamination capabilities.
The company hired Amec Foster Wheeler for construction management services. In addition to Amec, Arauco has engaged multiple local and Michigan-based companies in support of the plant’s design and site development.
From Woodworking Network: https://www.woodworkingnetwork.com/news/woodworking-industry-news/arauco-breaks-ground-michigan-particleboard-plant?ss=news,news,woodworking_industry_news,news,almanac_market_data,news,canadian_news
by Web Editor | Mar 15, 2017 | News
Arauco is investing in the construction of a new particleboard plant with a planned capacity of 800,000 square meters per year in Grayling, Michigan. For the first time, the company is purchasing a complete plant from Dieffenbacher. The two companies decided to work together in January 2016, followed by a phase of detailed engineering and concluding with the signing of supply contracts at the end of 2016.
The highlights of the scope of supply are Dieffenbacher’s EVOjet P gluing system, which reportedly uses up to 15 percent less glue; and the continuous CPS+ press, which, at 10 feet wide and 52.5 meters long, will be one of the largest particleboard presses in the world.
“Arauco always exercises prudence when it comes to committing to new development. Therefore, we are all the more pleased with the confidence that Arauco has shown in us with its decision to choose the CPS+,” says Bernd Bielfeldt, head of the Wood Business Unit at Dieffenbacher.
The two driers, together with the associated energy system that Chile-based Arauco also commissioned from Dieffenbacher, are large parts of the new operation. Grayling is located in the northern part of Michigan’s Lower Peninsula.
The contract also includes dosing silos for the chips, a glue mixing station, forming stations and the forming line; as well as the raw board handling system, the sanding line and the Lukki bearing system, which Arauco has already had experience with at its other sites.
From Woodworking Network: https://www.woodworkingnetwork.com/news/woodworking-industry-news/arauco-and-dieffenbacher-sign-supply-contracts-new-michigan-panel?ss=news,news,woodworking_industry_news,news,almanac_market_data,news,canadian_news
