Maine Company Seeks To Produce Innovative Wood-Fiber Insulating Boards

Maine’s glut of softwood fiber created by closed paper mills makes the state an ideal location for a factory that can produce insulation board from wood, a Belfast architectural and construction firm says, and it’s trying to find a European manufacturer that shares that vision.

GO Logic, which specializes in energy-efficient buildings, says it’s negotiating with undisclosed companies that make wood-based insulation board in Europe, where the product already is in commercial use. The goal is to have a plant operating here within two years.

Two of GO Logic’s executives also attended an affordable housing conference Aug. 3 and 4 in Philadelphia. One of them, GO Logic co-founder Matt O’Malia, was an invited speaker and discussed the company’s efforts. They also planned to line up commitments from a retailer in the New York City area to carry the product, as well as some contractors and a prefab builder. That’s crucial to attracting financing.

GO Logic also has been in discussions with a Maine lumber company that could be a source of sawmill waste, as well as a family-owned lumber yard with nine stores in Maine’s midcoast.

Taken together, these actions are another example of how businesses are looking at Maine’s abandoned paper mill sites and surplus capacity in wood harvesting to create new opportunities. Other efforts involve biofuels, agriculture and electricity generation.

From the Portland Press Herald: https://www.pressherald.com/2017/08/17/company-works-multiple-angles-to-produce-innovative-insulating-boards-in-maine/

Timber Structures Worldwide Show Potential Of Wood Construction

Roofs made from wood are one or the rarest roof types to find around these days, as concrete slab and shingles take over, according to Choice Solutions Roofing and Exteriors Co. In Oklahoma City.

Wood is not seen as strong as some other materials when it comes to construction, but in general well-maintained roofs made of wood can have a lifespan that ranges from 30 to 50 years. Having a wooden structure on top of a house has several good qualities, and it can look great. Here are some examples of wooden structures which are not the average roof that will provide an idea of how unique and marvelous structure topped off with wood can become.

The Centre Pompidou Metz has a hexagonal pattern of a load-bearing timber roof structure which is visible at night through its transparent covering membrane. It is interesting to know that the inspiration of the roof comes from a woven Chinese hat. Before this one-of-a-kind structure was created, it was studied from every angle to ensure that it would withhold heavy weather conditions. This woven like structure roof is made out of wooden beams, spaced 2.90 meters apart, forming a hexagon pattern that is 90 meters wide.

The timber used is glue laminated which enables the different lengths of the beams and makes them more resistant. It is without a doubt an astounding structure due to its complex curves and counter curves and therefore it is one of the most challenging and largest structure built up to date.

The mesh can allow the roof to expand 40 meters, made from protective fabric which consists of fiberglass and Teflon, forming a membrane over the wooden structure. This layer helps the inside temperature to stay natural. This building was created for displaying art and the goal behind the innovative structure was to draw tourism to Metz, France.

Read more on this from Woodworking Network: https://www.woodworkingnetwork.com/architectural-products/timber-structures-show-potential-wood-construction?ss=news,news,woodworking_industry_news,news,almanac_market_data,news,canadian_news

PELICE 2018 Will Focus On New Projects

PELICE 2018 Will Focus On New Projects

PELICE 2018 Will Focus On New Projects

Organizers of the sixth Panel & Engineered Lumber International Conference & Expo (PELICE) announced the first wave of exhibitor sponsors for the event to be held April 13-14, 2018 again in the Grand Ballroom North of the Omni Hotel at CNN Center in Atlanta, Georgia, USA.

The 2016 PELICE set a record attendance of 450 industry professionals, including representatives from 32 wood products producer companies. They heard 50 presentations on new project development, production technologies, industry issues and forecasts.

PELICE, which is hosted by Panel World magazine, covers the veneer, plywood, OSB, MDF, particleboard and engineered wood products sectors. The 2016 event was supported by 80 equipment and technology exhibitor sponsors.

PELICE exhibitor sponsorships include Gold, Silver and Bronze packages.

The early Gold sponsors for 2018 include B&W MEGTEC, Hexion, Sandvik, Sigma Thermal-TSI, Dieffenbacher and Siempelkamp.

First wave of Silver sponsors includes: Argos Solutions, Atlantic Combustion, Baumer Inspection, Biele, Con-Vey, Electronic Wood Systems, Georgia-Pacific Chemicals, Globe Machine, Grenzebach, IMA Schelling, IMAL-PAL, Meinan Machinery Works, MoistTech, Pallmann Industries, Player Design Inc., Process Combustion Corp., SUGIMAT, Timber Products Inspection, Westmill Industries and Willamette Valley Co.

Early Bronze sponsors are Automation Industries, CMA Engineering, Flamex, Georgia Forestry Commission, GreCon, Steinemann Technology and Wechsler Engineering.

The 2018 event will continue a theme that was begun at the 2016 conference—New Plant Development and Construction. Several speakers in 2016 addressed ongoing projects, all of which will have started up by this PELICE.

PELICE 2018 will also feature several speakers addressing ongoing new plant development.

“The attendees seem to enjoy hearing about projects that are in the course of construction, and the different considerations that a producer company encountered from project inception to this point in time,” comments Rich Donnell, Co-Chairman of PELICE and editor-in-chief of Panel World magazine. “In addition to these presentations, we hope to have some speakers bring up to date new projects that were addressed at the last PELICE and which have started up—the question being, did project evolvement and startup go as planned?”

The conference features eight keynote speakers over the course of two days, and then the conference breaks into three meeting rooms, with each room featuring a series of technical presentations on new machinery and equipment technology development.

“PELICE 2018 will be our sixth one, and it’s also a 10-year anniversary since the first one in spring 2008,” Donnell observes. “It’s been a heck of a ride for the wood products industry, and our event, during those 10 years. We greatly appreciate the support of those who participate.”

RELATED ARTICLES

PELICE DRAWS POWERFUL SPEAKERS IN ATLANTA

 

Latest News

GP Donates $100,000 To Volunteer Fire Department In Corrigan, Texas

The Corrigan Volunteer Fire Department, which has close to 25 active volunteers and answered more than 150 emergency calls in 2022, has kicked off a capital campaign to build a new fire station, which will cost $400,000. In support of this campaign, and in recognition of the three major facilities Georgia-Pacific operates (and the 1,000 people employed) in Polk County, Texas, the company has donated $100,000 to the effort…

Dieffenbacher Emission Control Systems

Dieffenbacher’s emission control solutions include emission measurements and dryer and press emission control systems. Emission measurements help plant operators understand which emissions are present and determine the type and amount of emissions. For example, using state-of-the-art methods, uncomplicated in-house emission measurements can be taken on stacks downstream of the dryer or the press exhaust system…

Weyerhaeuser Partnership Focuses On Firefighter Mental Health

Weyerhaeuser Co. and Firefighter Behavioral Health Alliance (FBHA) announced an expanded partnership on Fighting Fires Together, a campaign that provides support for wildland firefighters and their families. In its second year, the program is designed to provide resources and increase awareness around the importance of mental health assistance for these first responders…

Fletcher Building Orders Fine OSB Plant

New Zealand’s Fletcher Building Ltd. has ordered a complete plant for the production of Fine OSB from German machine manufacturer Dieffenbacher. The plant will be built at Fletcher Building’s Laminex site in Taupo, in the center of the country’s North Island. The new plant will include Dieffenbacher new belt dryer. The belt dryer is one example of how Dieffenbacher…

Uniboard Modernization On Track At Val-d’Or

Uniboard reports its $350 million particleboard plant modernization program is going as planned at Val-d’Or, Quebec; originally announced in June 2022, this is the third phase of its modernization for its particleboard and TFL mill. More than $100 million was invested in Phase 1 and Phase 2, which were…

Find Us On Social

Newsletter

The monthly Panel World Industry Newsletter reaches over 3,000 who represent primary panel production operations.

Subscribe/Renew

Panel World is delivered six times per year to North American and international professionals, who represent primary panel production operations. Subscriptions are FREE to qualified individuals.

Advertise

Complete the online form so we can direct you to the appropriate Sales Representative. Contact us today!

FraserWood Innovates With High-End Wood Products

Just off the winding Sea to Sky Highway running along the coast from Vancouver to Whistler, B.C., the unique wooden architecture of the Squamish Adventure Centre beckons tourists to stop in.

The building is almost entirely made of wood. The timber roof is shaped like two massive discs jutting out of the center of the structure almost like wings, separating the building into two sections.

The company behind the eye-catching structure is Squamish’s own FraserWood Industries. FraserWood opened its doors to Canadian Forest Industries in early April to show us how they turn cants into strong and beautiful custom timber products at their facility in Squamish, B.C.

The company has been in operation since 1998 when owner Peter Dickson purchased a radio frequency (RF) kiln from his former employer, Canfor. Today the company not only operates two RF kilns to dry massive timbers, but has expanded into custom planing and re-sawing, joinery and CNC milling and glulam.

The bulk of FraserWood’s customers are timber framers, but they also sell to building supply centers and log home builders. With a staff of more than 30 including scientists, engineers and R&D specialists, last year was the most productive in the company’s history, with more than 1.5 million bdft of high-value timber passing through the facility.

From Wood Business: https://www.woodbusiness.ca/sawmilling/mills/fraserwood-innovates-with-high-end-timber-products-4387

First U.S. Hardwood CLT Project In Development

If Yugon Kim realizes his dream, the new office building or housing complex going up in your city may be made out of large hardwood panels called cross laminated timber (CLT). The technology behind CLT has been used for decades in Europe, and it is just beginning to take root in the United States with softwood CLT leading the way. Kim’s Boston-based, architectural design firm IKD just won a $250,000 grant from the Forest Service for designing, developing and constructing the first hardwood CLT demonstration project in the United States.

The aim is to take low-value hardwoods and turn them into a high-value CLT construction project as a proof of concept. Kim explained, “Over 50% of every hardwood log in the region goes to low-value materials like pallets and cants. Our idea is to utilize this material and to upcycle it.”

Kim along with his design partner Tomomi Itakura have created an outdoor CLT construction project that is titled the Conversation Plinth and will be integrated as circular discs that provide a platform for viewing a sculpture at the Cleo Rogers Memorial Library.

Kim suggested, “The ultimate goal is to construct buildings in the United States using hardwood CLT. Our research hopes to lead toward hardwood mass timbers being used for U.S construction projects.”

The Conversation Plinth was designed for Exhibit Columbus, the annual celebration of architecture, art, design and community in Columbus, Indiana. IKD’s design was selected to win an inaugural J. Irwin and Xenia S. Miller Prize as part of a national competition.

From Pallet Enterprise: https://palletenterprise.com/view_article/4927/Hardwood-CLT