EPA Withdraws Final Rule Delay For Formaldehyde

After receiving negative feedback from the industry, the Environmental Protection Agency (EPA) withdrew its Direct Final Rule Wednesday, removing delayed compliance dates for certain formaldehyde emissions standards on wood products.

“Since the direct final rule and proposed rule’s publication, EPA has received several comments on the proposed amendments to the compliance dates that the agency considers to be adverse,” the agency said.

Published in May, the Direct Final Rule gave the composite wood industry more time to comply with certain standards, including extending the deadline to meet emissions standards, record keeping provisions and labeling rules:
• Emissions, recordkeeping and labeling provisions – March 22, 2018
• Import certification – March 22, 2019
• Laminated products – March 22, 2024

The rule also proposes to extend the transitional period for CARB-certified third-party certifiers (TPCs) to March 22, 2019.

The EPA will instead proceed with a final rule based on its proposed rule published on May 24 after considering all public comments.

From Woodworking Network: https://www.woodworkingnetwork.com/news/woodworking-industry-news/epa-withdraws-final-rule-delay-formaldehyde?ss=news,news,woodworking_industry_news,news,almanac_market_data,news,canadian_news

First Southeast U.S. CLT Plant Announced

From: Panel World Editors

International Beams plans to build the first cross-laminated timber production facility in the Southeastern U.S. in Dothan, Ala. A 227,000 square foot facility, a vacated GE plant, will be the manufacturing site for the company’s two new products, MAX-CORE CLT and MAX-CORE GLULAM.

International Beams, which has EWP (LVL, I-joist and rimboard) manufacturing facilities in Quebec and Ontario and is headquartered in Sarasota, Fla., was approved to receive tax incentive abatements for 10 years by the state of Alabama and the Houston County and 20 years by the city of Dothan.

Additionally, the Commission approved appropriating $632,000 to the Industrial Development Board of Dothan to meet obligations with the Alabama Municipal Electric Authority to facilitate the IB XLAM USA project.

Freres Lumber’s Massive Plywood Panels Receive Big Grant

A $250,000 grant from the U.S. Forest Service will help Freres Lumber Co. bring its veneer-based massive plywood panels to the market.

Announced late last year, Freres Lumber says its massive plywood panels (MPP) could be used for floors and walls in multi-story commercial buildings, and they could be made to order. Freres hopes its panels will revolutionize the construction industry.

“We were recently informed that our mass plywood plant was named the Forest Service’s top project in the U.S.,” Freres executive VP Rob Freres said. “This was a competitive process with 114 grant applications submitted for consideration.”

Designed to be an alternative to cross-laminated timber, Freres’ massive panels can be as much as 12 feet wide and 2 feet thick. Freres says there are many potential benefits.

Structures made of MPP could be made in days instead of months, says Freres, and use 20-30 percent less wood than cross-laminated timber. The lightweight nature of MPP could reduce truckload transport costs. Large format panels could be manufactured at a facility to include window, door, and all other required cut-outs – minimizing waste and labor on the job site.

From Woodworking Network: https://www.woodworkingnetwork.com/wood/panel-supply/freres-lumbers-massive-plywood-panels-receive-big-grant

Good Earth Project Gets ‘New Life’

Good Earth Project Gets ‘New Life’

Good Earth Project Gets ‘New Life’

 

A new investors group that has taken over daily operations of Good Earth Power AZ is seeking to ramp up the company’s execution of a far-reaching Forest Service stewardship contract that sought to thin or otherwise treat 300,000 acres in 10 years beginning in 2012, but has barely covered 10,000 acres in the five years since.

Another new look—aiming to give the effort a fresh start—is a company name change from Good Earth Power to NewLife Forest Products.

The project encompasses the Coconino, Kaibab, Apache-Sitgreaves and Tonto national forests and their ponderosa pine stands, and comes on the heels of years of devastating wildfires.

After a group of investors stepped in to take operational control of Good Earth at the end of 2016, a recent report says the investors are making multiple changes to increase output and completion of “task order” activities that accompany specific on-ground projects.

One key is to pursue a less vertically-integrated business model and work more with outside contractors as opposed to owning timber harvesting, chipping or trucking capacity, for example. Already the company has announced a partnership with major Phoenix-based trucking firm Knight Transportation, and foresters are looking to bring in experienced loggers from the Pacific Northwest to add to harvesting capacity.

In addition, NewLife Forest Products is planning a new small log mill that will help reduce chip production, plus adding a composting operation to help increase overall biomass utilization.

Withered and non-existent forest products industry infrastructure in the region has hampered the project from the beginning due to a lack of markets for the large volume of logs and especially biomass coming off thinning and other stewardship activities.

Recently, the company’s Heber, Ariz. sawmill was closed for renovations to increase log-processing capacity and was reportedly re-starting operations in mid June. Meanwhile, the new small log project replaces a mill previously planned for Williams, Ariz. that never got off the ground.

In the meantime, hog fuel and chips are going to Gro-Well, a soil additive company, and the biomass-powered Novo Power plant.

With such lofty goals to reduce fire risk on millions of acres across Arizona, the first major contract for the Forest Service’s (FS) Four Forests Restoration Initiative has a rocky history:

First, the FS in 2012 awarded the contract to a Montana-based firm with little experience over a local group seeking to build an OSB plant to utilize the small diameter material. Yet Pioneer Forest Products could never gain financing for its plans to build a cutting mill and small log facility along with biofuel plant.

In 2013 the contract was transferred to Good Earth Power, a company with even less experience, and overall operations have suffered since as Good Earth sought to establish markets and outlets for logs and biomass. The Campbell Group was brought in to aid procurement, but that relationship soured into a lawsuit, and Good Earth was the subject of 20-plus complaints received by the FS about late payments a and non-payments.

NewLife Chief Operating Officer Bill Dyer says the company can’t change what has happened in the past but is looking to make it right and move forward. According to Dyer, tactical execution has been lacking in operations. “What we’re trying to do is bring tactical execution to the project,” he says.

RELATED ARTICLES

NEWLIFE GAINS FULL PRODUCTION

Latest News

APA Honors Tony Vuksich

APA—The Engineered Wood Assn. presented Tony Vuksich the 2022 Bronson J. Lewis award during the APA Annual Meeting held October 15-18 at the J.W. Marriott Turnberry Resort in Aventura, Fla. The award is named in honor of the late Bronson Lewis, who served for 24 years as secretary and then executive vice president of the association. The award recognizes individuals for their leadership and outstanding contributions to the engineered wood industry…

SmartLam Announces Alabama Glulam Facility

SmartLam North America announced several major projects that will have a significant impact to the mass timber industry. SmartLam North America, which is the first U.S. manufacturer and is reportedly the largest manufacturer in North America of cross laminated timber (CLT), announced it will build a $50 million glulam…

The Show(s) Must Go On!

Article by Rich Donnell, Editor-In-Chief, Panel World September 2022 – If you think the pandemic caused the death of live trade shows, think again. Just take one quick browse through the Panel World September 2022 issue. In fact, trade shows almost snowballed us over this month…

Find Us On Social

Newsletter

The monthly Panel World Industry Newsletter reaches over 3,000 who represent primary panel production operations.

Subscribe/Renew

Panel World is delivered six times per year to North American and international professionals, who represent primary panel production operations. Subscriptions are FREE to qualified individuals.

Advertise

Complete the online form so we can direct you to the appropriate Sales Representative. Contact us today!

CalAg Rice MDF Plant Is A Go

CalAg Rice MDF Plant Is A Go

 

The CalAg rice straw-based medium density fiberboard plant is becoming a reality. CalPlant I, as it is called, has completed and closed financing for a $315 million plant to be built in Willows, Calif. with a production capacity of 140MMSF (3/4 in. basis) and a startup goal of late 2018.

The project has been in the works for more than 20 years, since the principals first shipped California grown rice straw to England for testing. Since then, the endeavor experienced a series of “almosts,” until the recent successful financing, which includes $228 million of tax-exempt private activity revenue bonds priced through the California Pollution Control Financing Authority, and $87 million cash equity.

A group of minority investors includes a subsidiary of Teachers Insurance and Annuity Association of America, Columbia Forest Products, the German-based machinery manufacturer Siempelkamp, CalAg LLC and a range of other investors.

The project stems from state legislation in 1991 that prohibited farmers from burning rice straw, the waste product of rice harvesting. Smoky haze had become an issue in the region.

CalAg President Jerry Uhland, a rice farmer, joined a small venture formed by another agriculture man, Jim Boyd, in 1996 that began researching rice straw-based MDF. They were soon joined by Les Younie, who had worked in wood products operations, and who today remains Vice President of Manufacturing.

The project is expected to bring several environmental advantages including water use reduction, methane emissions reduction, fungicide and chemicals reduction. And obviously it provides a new recycling market for roughly 275,000 tons of rice straw annually.

RELATED ARTICLES

CALPLANT I GEARS UP FOR FIRST BOARD

CALPLANT I NEARS THE FINISH (OR STARTING) LINE

CALAG RICE STRAW MDF PLANT

 

Latest News

APA Honors Tony Vuksich

APA—The Engineered Wood Assn. presented Tony Vuksich the 2022 Bronson J. Lewis award during the APA Annual Meeting held October 15-18 at the J.W. Marriott Turnberry Resort in Aventura, Fla. The award is named in honor of the late Bronson Lewis, who served for 24 years as secretary and then executive vice president of the association. The award recognizes individuals for their leadership and outstanding contributions to the engineered wood industry…

SmartLam Announces Alabama Glulam Facility

SmartLam North America announced several major projects that will have a significant impact to the mass timber industry. SmartLam North America, which is the first U.S. manufacturer and is reportedly the largest manufacturer in North America of cross laminated timber (CLT), announced it will build a $50 million glulam…

The Show(s) Must Go On!

Article by Rich Donnell, Editor-In-Chief, Panel World September 2022 – If you think the pandemic caused the death of live trade shows, think again. Just take one quick browse through the Panel World September 2022 issue. In fact, trade shows almost snowballed us over this month…

Find Us On Social

Newsletter

The monthly Panel World Industry Newsletter reaches over 3,000 who represent primary panel production operations.

Subscribe/Renew

Panel World is delivered six times per year to North American and international professionals, who represent primary panel production operations. Subscriptions are FREE to qualified individuals.

Advertise

Complete the online form so we can direct you to the appropriate Sales Representative. Contact us today!

Timber Construction Has Mill Machinery Rolling

Timber construction is opening a new market that has been keeping lumber and milling machinery busy at a growing number of wood products companies, including Montreal’s Nordic Structures, Sauter Timber in Rockwood, Tennessee, SmartLam, in Columbia Falls, Montana, and D.R. Johnson, in Portland, Oregon.

Oregon-based D.R. Johnson Wood Innovations, a subsidiary of D.R. Johnson, specializes in the manufacture of cross-laminated timber, or CLT, and glue-laminated beams from Douglas fir and Alaskan yellow cedar. D.R. Johnson Wood was the first U.S. company to receive APA/ANSI certification to manufacture structural CLT panels – and CEO Valerie Johnson plans to help grow the U.S. market.

D.R. Johnson has received the first U.S. certification to manufacture cross-laminated timbers (CLT) under a new standard approved last year by the American National Standards Institute. D.R. Johnson is one of only three North American companies certified by the Engineered Wood Association to construct CLT for use in buildings.

Johnson’s company employs 125 at a traditional sawmill and laminating plant, which was recently expanded by 13,000 square feet for increased CLT production. They’re currently fielding calls from hopeful builders, and manufacturing samples to be tested for fire safety and structural quality. One recent new wood construction project is a 14-story wooden apartment tower being built in Portland, Oregon.

From Woodworking Network: https://www.woodworkingnetwork.com/wood/pricing-supply/timber-construction-has-lumber-milling-machinery-rolling