by Web Editor | Mar 13, 2017 | News
Building a house, garage or even a shed today isn’t as easy as going to the local lumberyard and buying whatever dimension of wood you need. A lot of emphasis goes into the grade of the wood and its stress and load ratings, according to Everett Brands, manager of Arrow Building Center in Glencoe. Arrow took over the former Fullerton Lumber Center on Desoto Avenue this past October.
Today, main structural pieces, such as headers, consist of LVL, or laminated veneer lumber, an engineered product typically of poplar, fir or pine. It is laminated under heat and pressure with a moisture-resistant resin and it’s stronger than typical native wood. Building codes call for the use of specific lumber grades for specific applications.
“Anything longer than six feet as a header has to be LVL,” Brands said. The LVL products range up to 36 or 48 feet long. While regular lumber could sag or bow under extreme weight, the LVL won’t. Thus LVL is typically used over windows and entries, especially with tall entries.
“We use a lot of engineered products — beams, headers and I-joists,” added Matt Smieja, manager of Simonson Lumber, just outside Hutchinson along State Highway 7 East.
Years ago, when forests were being cut for the first time, the wood tended to be of higher quality as far as grain and knots. But new stands of trees generated are of a lower grade.
From the Hutchinson Leader: https://www.crowrivermedia.com/hutchinsonleader/news/business/engineered-lumber-has-replaced-natural-lumber-in-most-key-building/article_67ee0dc7-e4d8-56c8-932e-9ca668bb40bc.html
by Web Editor | Mar 8, 2017 | News
Innovation Abounds Among OSB, Plywood And Lumber
Though often seen as commodity products, the categories of wood structural panels (OSB and plywood) and lumber are not short on innovation—and they’re categories where educated dealers can truly serve their customers.
Manufacturers continue to unveil improvements on these wood staples, along with offering fresh ways to keep pros informed on best practices, design, and application. Though trade articles often wage an either/or scenario with plywood and OSB, both can be used in similar residential applications.
OSB holds the majority share of the structural panels market for residential construction, in part due to its lower price point. But plywood’s premium finish and advantage on the moisture front give it a stronghold in markets that have always used it and always will.
Plywood manufacturers are increasingly supplying panels for industrial applications such as concrete forming, for doors and windows, furniture manufacturing, and more.
“What we would recommend is that dealers talk with their customers,” says Judy Haney, plywood sales manager for Boise. “Find out what their customers want, what they need, and why. They may be surprised that builder preference changes over time, partly related to what they’re building, where they’re building, where they have to transport it, market pricing, and other factors. There are many considerations, and the more a dealer understands what a customer wants and needs in a structural panel the better prepared they’ll be to fill those needs.”
From LBM Journal: lbmjournal.com.
RELATED ARTICLES
OSB OUTPUT HAD UPTICK IN 2020
The monthly Panel World Industry Newsletter reaches over 3,000 who represent primary panel production operations.
Panel World is delivered six times per year to North American and international professionals, who represent primary panel production operations. Subscriptions are FREE to qualified individuals.
Complete the online form so we can direct you to the appropriate Sales Representative. Contact us today!
by Web Editor | Mar 6, 2017 | News
Pierce Leads Winston Plywood & Veneer
Winston Plywood & Veneer announced that Jon Pierce now serves as President and is overseeing startup and operation of the company’s new plywood mill in Louisville, Miss.
“I have known Jon as a friend and colleague for many years and can say without hesitation, he’s the right man for the job,” states New Wood Resources CEO Kurt Liebich.
Pierce is a longtime member of the Atlas Holdings and New Wood Resources’ family. He was previously president of Olympic Panel Products in Shelton, Wash.
“His (Pierce’s) approach at Olympic was simple; he supported his team by making the safety of every associate his top priority, each and every day. He understands our workplace from the bottom up, having started his career as a project manager over two decades ago. At each stop in his career, his company has been a stronger, safer and more profitable place than when he arrived,” Liebich adds.
Pierce received his degree in Mechanical Engineering from California State University.
Pierce takes over the Winston Plywood role from Liebich, who had been overseeing the plywood mill since Dr. Richard Baldwin’s retirement in September.
“Winston Plywood is the finest plywood facility in North America. Our future is bright,” states Liebich, who will continue his role as New Wood Resources CEO.
RELATED ARTICLES
PANEL WORLD NOVEMBER 2020
SOMETIMES THE PATHS COME FULL CIRCLE
The monthly Panel World Industry Newsletter reaches over 3,000 who represent primary panel production operations.
Panel World is delivered six times per year to North American and international professionals, who represent primary panel production operations. Subscriptions are FREE to qualified individuals.
Complete the online form so we can direct you to the appropriate Sales Representative. Contact us today!
by Web Editor | Mar 1, 2017 | News
The world’s first ever technology to recycle MDF waste has moved a step closer to reality. MDF Recovery has successfully concluded proof of concept trials to develop a commercially viable process to recover wood fiber from waste MDF.
It is the culmination of more than six years’ research and development to create a technology that will offer the first alternative to the use of landfill or burning to dispose of MDF. Britain, alone, disposes of around 350,000 tons of MDF each year.
The solution generates a new raw material source for the wood/natural fiber industry that reduces the demand on standing forests. The recovered fiber is of the same high quality as virgin wood fiber and provides feedstock to the manufacturers of MDF board, insulation products and horticultural growing products.
Co-founder and managing director Craig Bartlett is now ready to take the proprietary technology to the commercial market. Craig, who established MDF Recovery in 2009, says, “We have already begun discussions with a number of leading companies and organizations operating in the MDF production and waste industries and look forward to progressing these during the early part of 2017.”
“The recycling process we have developed is a genuine world first. There is no other environmentally-friendly alternative to the use of landfill or burning to dispose of MDF waste.”
From Furniture & Joinery Production: https://www.furnitureproduction.net/news/articles/2017/02/655160671-successful-trials-conclude-mdf-waste-recovery
by Web Editor | Feb 27, 2017 | News
From: Panel World Editors
Organizers have announced that the sixth Panel & Engineered Lumber International Conference & Expo (PELICE) will be held Friday-Saturday, April 13-14, 2018, and once again in the Grand Ballroom North of the Omni Hotel at CNN Center in Atlanta, Georgia, USA.
PELICE again immediately follows the Wood Bioenergy Conference & Expo, which will be held April 11-12, 2018, also in the Grand Ballroom North. Both events are supported by Panel World and Wood Bioenergy magazines, and Georgia Research Institute.
The 2016 PELICE set a record attendance of 450 industry professionals, including representatives from 32 wood products producer companies. They enjoyed 50 presentations on new project development, production technologies and market forecasts concerning veneer, plywood, OSB, MDF, particleboard and engineered wood products. The event was supported by a record 80 equipment and technology exhibitors, of which 37 exhibited in both the PELICE and Wood Bioenergy events.
Many forecasts expect what has been a gradual improvement in building products sectors to begin snowballing in 2018. Several new mill projects in both the structural and non-structural sectors will be hitting full production mode, and several others will be nearing startup. New developments in new engineered wood products will also be gaining momentum.
The 2018 PELICE will address all of this as well as the latest developments in machinery technologies.
Such momentum generates great anticipation for the 2018 PELICE. Once again, Gold, Silver and Bronze exhibitor sponsorship packages will be offered.
For exhibitor sponsorship information, contact Fred Kurpiel, [email protected]; 678-642-1238.
To submit a presentation idea, contact Rich Donnell, [email protected]; 334-834-1170.
by Web Editor | Feb 24, 2017 | News
Hall 26 will once again be home to the Wood Industry Summit during Ligna 2017 in Hannover, Germany and Hatton-Brown Publishers is once again an official partner of the event. Hatton-Brown Publishers is affiliated with Panel World, Timber Processing and Wood Bioenergy magazines.
The Summit made a very successful debut in 2015, with international customers achieving an investment volume of some €30 million. As an international meeting place for the primary industry cluster, the Wood Industry Summit features innovative solutions for harvesting and processing and for integrating the various stages of processing.
The Summit is divided into three areas: an exhibition, a forum and a matchmaking hub. Every day from Tuesday, May 23, to Friday, May 26, the forum of the Wood Industry Summit will highlight a topic of current international interest in the industry, with experts from Germany, Austria, Canada, Russia, Sweden and Spain giving presentations and fielding questions from the audience.
The main themes at the Wood Industry Summit 2017 include:
Tuesday, May 23: Forestry 4.0: Vision or Future?
Wednesday, May 24: Development and Infrastructure to Ensure Sustainable Forestry
Thursday, May 25: Forest Fires – Prevention, Detection and Firefighting
Friday, May 26: Fleet Management to Optimize the Logistics Chain from the Forest to the Factory
Exhibition stands located next to the forum will provide an ideal networking environment for exhibitors and visitors. Panel discussions, keynote speeches and the accompanying exhibition will ensure that the 2017 edition of the Wood Industry Summit is once again a major highlight in the primary processing industry’s annual calendar.
Forum participation is free of charge for visitors and delegations, and advance registration is not required.
Ligna will be held May 22-26 at the Hannover Exhibition Grounds. It’s organized by Deutsche Messe AG and German Woodworking Machinery Manufacturers’ Association.
Contact Anja Brokjans, [email protected].
