Not Exactly Steinbeck But We’ll Take It
Article by Rich Donnell, Editor-in-Chief, Panel World July 2020
We’ve all been confined to our small corners of the world for the past three months, but my wife and I ventured forth and made the drive from Montgomery, Alabama to Denver Colorado at the end of May to visit my daughter and son-in-law and our 11-month-old granddaughter. We hadn’t seen them since Christmas and our duty was to load our giant Suburban with a bunch of their stuff that they didn’t take with them to Dartmouth College in Hanover, New Hampshire, where they were bound in early June so my daughter could complete a year-long dermatopathology fellowship.
We had made the drive several times (they lived in Denver four years while she completed her residency). There are a few ways to get there (we tried them all) and they’re all about 1,400 miles in distance and a solid 22 hours of driving. From Montgomery you can go through Memphis or Dallas, but we’ve always preferred the Memphis route. From Memphis you can work your way up to Kansas City and turn west onto the long stretch of I-70 through Kansas and straight into Denver; or you can stay on I-40 through Little Rock and Fort Smith over to Oklahoma City, and then turn north through Wichita and come out on I-70 and then head west.
Or, as we prefer, you can stay on I-40 through Oklahoma City just before reaching the Texas line veer off the interstate and follow the highways up and around Amarillo, through the Dust Bowl towns of Wheeler, Pampa, Borger, Stinnett, Dumas and Dalhart, all in Texas, before proceeding into the northeast corner of New Mexico and spending the night in Clayton. Yep, 17 hours and multiple stops at Love’s gas stations to Clayton, where you can stay at Hotel Ecklund, a three-story stone structure built in 1892, near where they hanged outlaw Black Jack Ketchum in 1901. We were the only people staying there that night, as it was “mostly” closed due to the virus.
Clayton is a quaint town of fewer than 3,000 and seeing its main street businesses all shut down because of the virus and watching the few people we saw walking around wearing masks really brought home just how all-encompassing the virus crisis is. Some of those businesses, as we all know, won’t make it back.
This northwest Texas into northeast New Mexico drive, along the Santa Fe Trail and through vast ranches and farmlands and not-too-distant mountains is very scenic. From Clayton you continue west to Raton to get on I-25 and head north into Colorado, through Trinidad, Pueblo, Colorado Springs and on into Denver.
By the time we reached Denver, the protests had started downtown (a couple of miles from my daughter’s house), but close enough to add even more anxiety on top of the virus jitters.
We had a wonderful visit with our granddaughter, though we only stayed a couple of days, left with a vehicle full of boxes and drove the same way back home but straight through; again, lots of Love’s and – as I’ve always felt is the true indicator of a rebounding economy – lots of trucks.
It felt good to get out.
Latest News
TP&EE Hosts Mass Timber Developments
The biennial Timber Processing & Energy Expo, following a pandemic-induced cancellation in 2020, returns this September 28-30 to the Portland Exposition Center in Portland, Ore. Hatton-Brown Expositions, an affiliate of Panel World magazine, has hosed the event since 2010.
“It’s hard to believe it has been four years since TP&EE was held, and what a strange trip it has been,” comments Rich Donnell, TP&EE Show Director and Editor-in-Chief of Panel World. “The important thing is that we’re back face-to-face. ‘Virtual’ is okay, but it’s not like being there.”
RoyOMartin Adds Natalie Monroe To Executive Leadership Team
RoyOMartin has named Natalie Martin Monroe Vice President of Environmental, Safety, and Sustainability Operations. She will also serve as a member of the Strategic Action Leadership Team (SALT) and the Corporate Secretary for the Martin Sustainable Resources (MSR) Board of Directors…
Softwood Board, FS Announce Mass Timber Awards
The Softwood Lumber Board (SLB) and USDA Forest Service recently awarded $2 million total to six projects that highlight innovative architectural design and mass timber’s significant role in carbon reduction. According to SLB officials, lessons learned from each project will be shared with the construction community to help support future projects, including cost analyses, life cycle assessments and other research results…
Peanuts And Crackerjacks
Article by Rich Donnell, Editor-In-Chief, Panel World July 2022 – Sometimes the mention of a wood products plant rings as true as an old ballpark. Houlton, as in Houlton, Maine, is one example. You might say Louisiana-Pacific has been playing at the same Houlton…
Pacific Woodtech Acquires LP EWP Division
Burlington, Wash.-based Pacific Woodtech announced the acquisition of Louisiana-Pacific Corp.’s EWP (I-Joist and LVL) division for $210 million. The acquisition includes LP laminated veneer lumber and I-Joist manufacturing facilities in…
Find Us On Social
Newsletter
The monthly Panel World Industry Newsletter reaches over 3,000 who represent primary panel production operations.
Subscribe/Renew
Panel World is delivered six times per year to North American and international professionals, who represent primary panel production operations. Subscriptions are FREE to qualified individuals.
Advertise
Complete the online form so we can direct you to the appropriate Sales Representative. Contact us today!