Not Exactly Steinbeck But We’ll Take It

googletag.cmd.push(function() { googletag.display('div-gpt-ad-1548376180744-0'); });

Article by Rich Donnell, Editor-in-Chief, Panel World July 2020

We’ve all been confined to our small corners of the world for the past three months, but my wife and I ventured forth and made the drive from Montgomery, Alabama to Denver Colorado at the end of May to visit my daughter and son-in-law and our 11-month-old granddaughter. We hadn’t seen them since Christmas and our duty was to load our giant Suburban with a bunch of their stuff that they didn’t take with them to Dartmouth College in Hanover, New Hampshire, where they were bound in early June so my daughter could complete a year-long dermatopathology fellowship.

We had made the drive several times (they lived in Denver four years while she completed her residency). There are a few ways to get there (we tried them all) and they’re all about 1,400 miles in distance and a solid 22 hours of driving. From Montgomery you can go through Memphis or Dallas, but we’ve always preferred the Memphis route. From Memphis you can work your way up to Kansas City and turn west onto the long stretch of I-70 through Kansas and straight into Denver; or you can stay on I-40 through Little Rock and Fort Smith over to Oklahoma City, and then turn north through Wichita and come out on I-70 and then head west.

Or, as we prefer, you can stay on I-40 through Oklahoma City just before reaching the Texas line veer off the interstate and follow the highways up and around Amarillo, through the Dust Bowl towns of Wheeler, Pampa, Borger, Stinnett, Dumas and Dalhart, all in Texas, before proceeding into the northeast corner of New Mexico and spending the night in Clayton. Yep, 17 hours and multiple stops at Love’s gas stations to Clayton, where you can stay at Hotel Ecklund, a three-story stone structure built in 1892, near where they hanged outlaw Black Jack Ketchum in 1901. We were the only people staying there that night, as it was “mostly” closed due to the virus.

Clayton is a quaint town of fewer than 3,000 and seeing its main street businesses all shut down because of the virus and watching the few people we saw walking around wearing masks really brought home just how all-encompassing the virus crisis is. Some of those businesses, as we all know, won’t make it back.

This northwest Texas into northeast New Mexico drive, along the Santa Fe Trail and through vast ranches and farmlands and not-too-distant mountains is very scenic. From Clayton you continue west to Raton to get on I-25 and head north into Colorado, through Trinidad, Pueblo, Colorado Springs and on into Denver.

By the time we reached Denver, the protests had started downtown (a couple of miles from my daughter’s house), but close enough to add even more anxiety on top of the virus jitters.

We had a wonderful visit with our granddaughter, though we only stayed a couple of days, left with a vehicle full of boxes and drove the same way back home but straight through; again, lots of Love’s and – as I’ve always felt is the true indicator of a rebounding economy – lots of trucks.

It felt good to get out.

 

googletag.cmd.push(function() { googletag.display('div-gpt-ad-1548375988914-0'); });

Latest News

LIGNA 2027 Announces Guiding Theme: Woodbound Future 

LIGNA 2027, to be held May 10-14, in Hanover, Germany, will be held under a unifying theme: Woodbound Future. With this theme, the organizers Deutsche Messe and the VDMA Woodworking Machinery Assn. establish a clear…

Siempelkamp Takes Over SicoScan Measurement From EWS

Siempelkamp reports it is taking over the SicoScan measurement technology systems from the previous manufacturer, Electronic Wood Systems (EWS). A majority shareholder of EWS of Hameln, Germany reportedly has sold out to the Kronospan Group.…

Panel World Takes Inside Look At 2026 APA-EWTA Annual Meeting

Wood panel industry professionals gathered in Amelia Island, Fla., for the 2026 APA-EWTA Info Fair and Annual Meeting, bringing together manufacturers, equipment suppliers and industry leaders for networking, technical discussions and updates on the engineered…

Dürr’s New Name Is Envanio

Dürr’s New Name In Envanio Dürr CTS is now Envanio. The international specialist in air pollution control technology and equipment is officially operating under a new brand name. According to the company, the name Envanio…

Kadant Announces CEO Succession Plan

Kadant Inc. announced that Michael Colwell was appointed as President and Chief Operating Officer effective October 1, and as President, CEO and a Director effective January 2, 2027, as part of a succession plan. Jeffrey…

Find Us On Social

googletag.cmd.push(function() { googletag.display('div-gpt-ad-1589916740199-0'); });
googletag.cmd.push(function() { googletag.display('div-gpt-ad-1548376916922-0'); });
googletag.cmd.push(function() { googletag.display('div-gpt-ad-1548376961890-0'); });
googletag.cmd.push(function() { googletag.display('div-gpt-ad-1548377005333-0'); });
Newsletter

The monthly Panel World Industry Newsletter reaches over 3,000 who represent primary panel production operations.

Subscribe/Renew

Panel World is delivered six times per year to North American and international professionals, who represent primary panel production operations. Subscriptions are FREE to qualified individuals.

Advertise

Complete the online form so we can direct you to the appropriate Sales Representative. Contact us today!